Products Catalog | wen zhou plastic co.,ltd China

Home > Product Catalog

Member Since

2008

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

wen zhou plastic co.,ltd

Round Pre-Insulating Terminals (TO-JTK Type)

Cable size: 0.5~1.5mm2 (A.W.G.22-16) ;
Max current: Imax=19A ;
Material: purple copper ;
Thickness:0.75mm
Self-Locking Nylon Cable Ties

Material: Nylon 66, 94V-2 certificated by UL. Heat resisting, erosion control, insulate well and not apt to age.Color: Natural (or white, standard color), black and other colors are available as
Nylon Cable Gland

With abundant specialize production experience and advanced technologies, we develops, researchs and produces Nylon Cable Gland, the products have been widely applied to many fields such as junction
Nylon Cable Ties Value pack

Nylon Cable Ties Nylon Cable Ties Nylon Cable Ties Nylon Cable Ties Nylon Cable Ties Nylon Cable TiesNylon Cable TiesNylon Cable TiesNylon Cable TiesNylon Cable TiesNylon Cable TiesNylon Cable
Nylon Close-end Wiring Connector

Material: Silver-coated copper piece covered by UL. Approved Nylon or PE.How to use: Put in the bare wire end into the cap and press wit clipper.Application: Wire joining. Material: Silver-coated
Cable Makers

Cable Makers Material: Made from PVC, oil and erosion control, heat resisting up to 85℃.Cable Makers Structure: The inside is hollow, but elastic, the diameter can change with the needed wire.Cable
TG-6 TIE GUN

For tensioning and cut-off cable tie form 24mm-4.8mm.For "DIY" OnlyFor tensioning and cut-off cable tie form 24mm-4.8mm.For "DIY" Only For tensioning and cut-off cable tie form 24mm-4.8mm.For "DIY"
Tie mounts

Tie mounts Material: UL approved Nylon 66, 94V-2, with imported adhesive sticker. Good insulation, long
Spiral end connector

Spiral end connector Material: PVC, threaded, Heat-resistant and insulating.How to use: Put the joint of two wires into the cap and screa if in until it is
Cable tie holder

Cable tie holder Cable tie holder Cable tie holder Cable tie holder Cable tie holder
Saddle type tie mounts

Saddle type tie mounts Material: UL approved Nylon 66 or PE, 94V-2.Saddle type tie mounts Application: Saddle design provide maximum stability to wire bundles
Self-locking nylon cable ties

Self-locking nylon cable ties Material: Nylon 66, 94V-2 certificated by UL. Heat-resisting, erosion

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.