Electric Heaters

electric heater (for diffusion pump)

replace the varian VHS-10(Improt from America)use in diffusion pump,230v/2200w,use high density and high temperature alloy wrap,the trait are rise of temperatures very fast,stability very high and
electric heaters (for hot runners)

these series of thermocouples are specified for the temperature measurement of molds with hot runner,plastic molding machineries,and feeding cylinders on rubber and sulferization machineries.The
electric heater (for hot runner)

the heater special for hot runner,use strict technics make from high quality stainless steel.German heating alloy wire and high purity MgO, the heating bar diameter if 2mm. and roll into spring with
electric heaters (polished spring style)

round section:3,4,5
thermocouple attached:E,J,K
Flexible SS lead wire available
electric heaters (polished spring style)

rectangular section:4*2
thermocouple attached:E,J,K
electric heater (spring style for hot runner)

Voltage:220V,230V and 240V
Powder:115W-2000W
Inner diameter:10-42mm
length:30-280mm
Section:3*3,3.5*3.5,4*4,3,4,5,4*2
Thermocouple attached:Type E ,J and K
Surface treatment:Polished or
electric heaters (sandblasted spring style)

square section:3*3,3.5*3.5,4*4
rectangular section:4*2
round section:3,4,5
thermocouple attached:E,J,K
electric heaters (special design)

special design for Hot runner, the section with 3*3,3.3*3.3,3.5*3.5,4*2,4.2*2.2,4*4,6*6,power density 6-7W/CM2,the type K or J thermocouple available.
electric heaters (with duct)

the heater hot up the liquid or gas flow in duct,the attached thermocouple and indicating meter can control the temperature(under 700 degree)
electric heaters (with shape "radar")

this type design to a special shape,the heater cling on to the work piece,heat exchange very fast,the work piece hot up to 600-700 degree in a very short time
electric heaters (special coil heater)

the heater use one cold junction setting two heating element with diameter 1.5,1.8,2,2.5,35mm unheated length at lead end,inner diameter,length,voltage and power according your request.
electric heaters (H series cylinder style for hot runner)

Rated voltage:220v,230v and 240v
inner diameter:10-42mm
length of the cylinder:40-280mm
Maximal powder density:9W/cm2
maximal working temperature:650 degree
powder:200w-2000w
thermocouple
electric heaters (with sleeve)

the heater use two heating element with diameter1.5,1.8,2,2.5,35mm unheated length at lead end,the outer fix a protection sleeve,inner diameter,length,voltage and powder according your request.
electric heaters (armored wrap-up style electric heaters)

voltage:220v-240v
powder:168w-300w
dimension of section:1,1.5,1.8,1.3*2.1
inner diameter:19mm
length:31mm
electric heaters (armored wrap-up style electric heaters)

Applications
1.plastic molding nozzles
2.plastic blowing machines
3.plastic extruders
4.fiber spinnerets
5.other related equipments
electric heaters (small diameter high and medium power density)

voltage:30v, 70v,110v,220v,230v,240v
power:20w-150w
inner diameter:3-8
thermocouple available:type K and J(outer diameter≥Ф4)
electric heaters (Armored heating cables)

Applications
1.for vacuum deposition in electronic industry
2.for conservatories and drying tunnels
3.for vacuum cooling drying equipment
4.for thermoforming
5.for heat treatment
6.for epoxy

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.