Selling Leads from Jiashan Pvb Sliding Bearing Co.,Ltd China

Home > Selling Leads

Member Since

2006

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

Jiashan Pvb Sliding Bearing Co.,Ltd

sell Hydraulic bushing (Bushing)

pvb-10D Hydraulic bushing is developed on the basis of pvb-10P and meanwhile considering the motion way of oil pump and damper. it is the substitute of and parallels in performance with abroad DP4.In
JF-800 bimetal bushing (bearing)

JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Therefore it has a
FR bearing,PTFE bearing,bush

FR is a composites material with bronze wire mesh as frame and calendered with a film of filled poly tetrafluoroethylenne. This is of low friction and low wear, and is rather soft and is to be
sell con rod bush

JF-700 is a bimetal bushing with steel as backing and sintered CuPb30 as lining layer. It has good performance in anti-seizing, alien substance contamination. It is necessary to be over plated
bearing,wrapped dry bearing,du bush

pvb-10X is wall wrapped bearing made of triple layer composites material which consists of a steel backing a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as
sell shock absorber bearing,bearing,du bush

pvb-10P is particularly suitable for bushes in reciprocating motion, and the properties are similar to that of the foreign product designated as Dd2.It is wear resistant, and so can keep the
sell pumps bearing,bearing,du bush

pvb-10T is composed of a specially designed surface layer of PTFE formulations and is specifically applied for the high PV bushes of gear oil pumps. It is to be used in hydrodynamic or boundary
stainless steel bearing,bush

pvb-10SS stainless bushing with plastic coated is based on stainless steel spay-painted PTFE on the surface .It is of anti-acid, anti-alkali, anti-salty liquid and can be widely used in chemical
bush,bearing,dx bush,lead free bearing

pvb-20S is similar to foreign made DS bush, and may be operated without lubricant or under a trace of oil. It is of low friction, anticorrosion and is of long life. This is now applied in machines
oil pumps bearing,DU bushes,oilless bearing (bearing)

It is composed of a specially designed surface layer of PTFE formulations and is specifically applied for the high PV bushes of gear oil pumps. It is to be used in hydrodynamic or boundary
carrier roller bearing,track roller bimetal bushes (bearing)

Steel backed lead bronze lined bearing material for marginal lubrication application. Suitable for oscillation movement or rotation motion with high load capacity and lower speed excellent wear
dx bush,bearing,sliding bearing

pvb-20Y Non-lead boundary lubrication bearing is improved on the basis of pvb-20X.It can be applied to the field where non-lead is required .Now it''s widely used in textile machines, auto
bearing,engine bearing,camshaft bush,bush

JF-20 is a high tin and aluminum based bushing, which adopts steel as backing and is coated a lining of AlSn20Cu through rolling treatment. It is a fairly good fatigue resistance, load capacity and
steel-lead bronze alloys based bearing,bushings

FB08G is a kind of steel-lead bronze alloys based bearing which is embedded with particular formulation of solid lubricants. Owing to the high strength, high load capacity and the spirally
bronze bearing,oilless bearing,industry bearing

FB092 bronze bushing is based on bronze CuSn8.3P0.3 and evenly distributed drilling oil hole on its body . When in assembly, oil or grease should be stored in the holes before bushing is sealed from
plastic injection machine bearing,JDB bearing

JDB-4 is based on cast iron Ht250 and embedded with solid lubricant. Very good performance when under low load. Not suitable for middle and high load. A typical cost saving material, can substitute

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.