Products Catalog | Kanpus Refrigeration Co., Ltd. China

Home > Product Catalog

Member Since

2008

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

Kanpus Refrigeration Co., Ltd.

Refrigeration quick coupler

Quick coupler be using for refrigeration and air conditioning. The size is 400QC17L/H, include the high pressure coupler and low pressure coupler
Defrost Timer for Refrigeration & Air Condition

defrost timer (DS-001, DS-002, DS-003, DS-004, DS-004B, DS-005, DS-006, DS-007, DS-008, DS-010, DS-011, DS-014)
1. Low noise; 2
refrigeration QD relay

The QD relay be using for refrigeration to protect the overloading.
For more details, please contact with us.
Refrigeration shaded pole motor

refrigeration shaded pole motor IS-3210SNPSA for refrigeration system. There are more motors as: RE-01WT52, IS-3210DWNFF-2, IS-3210SNPSA, IS-3210DWNFO, J58-00024K,
Refrigeration Copper Fitting

The copper fittings be widely used in the ACR and Plumbing system. It focuses on producing two sorts: Welding copper fittings and solder ring copper fittings; Seven series: TEE, ELBOW, COUPLING, STOP
Heating Element for Water Heater

Material: Copper
Outer Diameter: 8.0mm-8.4mm
Length available: 30cm - 90cm
Voltage: 220V-240V/50HZ, 110V/60HZ
Surface: Polish Nickel plated
Output Power: 1000W-3000W
1-1/4" brass flange,
Refrigeration Hand Valve

Hand valve ( Flare&ODF Solder) applied to the liquid, air suction and heated air lines of refrigeration units. Basic Features: Available with all fluorinate refrigerants. The valve could be fully
Refrigeration Wire Tube Condenser

Wire tube condensers for water cooler and water dispensers
Installed outside of water coolers
1) Material:
A) Bundy tube (steel tube coated with copper): 4.76 x 0.71mm
B) Steel wire: 1.4 -
Refrigeration Condenser

Air-cooled Condensers are suitable in a wide range of refrigeration and air conditioning application.1. FNS and FNV series used Internal rotor motor with 6 pole; FN series can choose Axial motor or
Copper Filter Drier

1) Copper filter driers (Copper Strainers) for refrigerators, freezers, air conditioners and compressor units
2) Both ends with plastic caps, big one or little one (white, yellow, red, blue, green,
Vibration Absorber

OEM is available Size are available in both in metric and inch units The ferrule and tube end part are made from copper Hose and copper rube are brazed welded All parts have been cleaned and
Starter Relay

using for refrigerator
Pressure Switch

Adopt Eng. Thread quick connector or brass tube welding structure. This makes the assembly and using easily, no need for any special mounting fixing equipment. Customers can choose to use inserter or
Sight Glass

the size be from 1/4" to 7/8"
Thermostat F2000

Specifications:
1) Temperature range: -30 - +30oC
2) Breaking capacity 16A / 250V
3) Capillary length: 1.5m
4) Can be used to control occasional heating cables for frost protection of pipes in
Pressure Controller

single controller, dual controller, differencial controller, be using for refrigeration unit
DC fridge

DC fridge for car, 12V or 24V DC compressor
Brazing Rod

We sell Preformed Solder rod used in coil manufacuring for the HVAC manufacturing industry.
Our Solder rods are made from a self fluxing copper / phos. Chemical mixture. The normal flat size is
Axial Fan Motor

Detailed Product Description
1) NSK bearing.
2) Both 4 poles & 6 poles are available.
3) Available volts: 220v, 110v, 380v
4) Available size: 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm,
Insulation Pipe

The wall thickness of insulation pipe be included 1/4", 3/8", 1/2", 3/4", 1"

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.