Selling Leads from Zhangjiagang Medycon Machinery Co.,Ltd. China

Zhangjiagang Medycon Machinery Co.,Ltd. > Selling Leads

Member Since

2007

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

Zhangjiagang Medycon Machinery Co.,Ltd.

sell medical beds, hospital beds,electric beds

Size: 2150*900*450/750mm
Material: Bed base, leg and frame are all made of cold-rolled steel plate and tube and coated by electrostatic spray after twice phosphatization. The quality attains national standard. Head and foot boards are made of imported PP materials.
Introduction: It is equipped with LINAK motor imported from Denmark which is quiet and noiseless and able to support over 250kgs. A
Aluminum Alloy Stretcher

Max. unfolded dimensions (L*W*H): 202*42*7cm
Min. unfolded dimensions (L*W*H): 168*42*7cm
Self-weight: 9kg
Load bearing: 120kg
Aluminum Alloy Stretcher for Ambulance Car

Bearing weight: >120kg
High position dimensions (L*W*H):190*55*90cm
Low position dimensions (L*W*H):190*55*26cm
Maximum angle of the back: 60?
Weight: 40kg
Size of the castors: 125mm
Alloyed-Aluminum Trolley Stretcher

Dimensions (L*W*H): 190*54*88mm
Size of the castors: 160mm
Maximum Angle of the Back: 60?(YQC-3L)
Load bearing: >120KG
Weight: 36KG
Electric bed with two functions

The two functions are showed in the picture
The first crank is function is head rise and down(0-80)
The second crank is function is foot rise and down(0-35)
Accessories wheels
Aluminum alloy protective railing
manual hospital bed

The first crank function is head rise-and-down(0-80 degree)
The second crank function is foot rise-and-down(0-35 degree)
Accessories I.V.pole
Aluminum alloy protective railing
electric hospital bed

1 ABS,steel shelf,fast dismantled bedstead,with four anti-impact protection equipments.
2 Installed side turnover banister on both sides of bed.
3 Centre control castors(diameter 150mm),which are brake at the same time.
4 Molded and punched bed surface strip,having good ventilation.
5 The lifting of back, leg and the whole body are controlled by medical electro-motor.
6 The main material of t
manual bed with center controlled locked

The three functions are showed in the pictureThe first crank function is head rise-and-down(0-80 degree)The second crank function is foot rise-and-down(0-35 degree)The third crank function is HI/LO for the whole bed frame(distance between bed frame
and floor lowest450-highest700mm)
Accessories I.V.poleWheelsAluminum alloy protective railing
Electric bed with three functions

The three functions are showed in the picture
The first function is head rise and down(0-80)
The second function is foot rise and down(0-35)
The third function is HI/LO for the whole bed frame(distance between bed frame and
floor lowest250-highest550mm)
The three functions are showed in the picture
12.5CM Castors 2 With Brakes,Voltage:220/110V, 3 Motors(remote)

Alumin
Multifunctional electric hospital bed

Wish you are interested in and start cooperation with us by an inquiry as soon as
possible.
Your earliest reply is highly appreciated!

Page 1 of 2

Go to Page

Related Manufacturers