Selling Leads from Taizhou Minghua Metallurgy Powder Factory China

Member Since

2008

Taizhou Minghua Metallurgy Powder Factory

nickel base for HVOF - 52

composition ; : Ni-14Cr-4Si-3B-4Fe-0.7C ; ; ; ; ; ;
particle size: 250-500mesh ; ; ; 53/20um
nickel base for HVOF - 51

composition ; : Ni-17Cr-4Si-3.5B-3Fe-0.9C ; ; ; ; ; ;
particle size: 250-500mesh ; ; ; 53/20um
nickel base for HVOF - 50

composition ; : Ni-14Cr-3.5Si-2.5B-4Fe-0.6C ; ; ; ; ; ;
particle size: 250-500mesh ; ; ; 53/20um
Cobalt base self-fluxing alloy powders - HQ.Co17

100-200mesh ; 150-320mesh ; ; 150-400mesh ; ; 250-500mesh
nickel base for HVOF - 53

nikel base self-fluxing alloy powder for HVOF
Cobalt base self-fluxing alloy powders - HQ.Co15

Co-bal Cr-19.0 ; W-13.0 Ni-13.0 B-3.0 Si-3.0 C-1.0 Fe- Mo-
nickel base self-fluxing alloy powders - HQ.Ni24

Ni-bal Cr-15.0 B-3.0 Si-2.8 C-2.2 Fe-2.0 ; Cu-1.5 Mo-1.5 W-30
;solidus~liquidus ; 950-1065°C
Nickel based alloy powder

The melting point of this alloy is is low, the fusibility is good, with good high-temperature intensity, excellent wear resistance , able to bear the high temperature, anti thermal shake impact,
Cobalt-based Alloy

excellent high-temperature intensity, anti-fatigue properties in high-temperature, thermal shock resistance and good performance of the impact of anti-oxidation and corrosion resistance, with the
Stainless steel powder

The main scope of using stainless steel powder: 1. Using powder metallurgy (PM) on sintered suppression. ; 2. Metallurgy injection molding (MIM). ; 3. Sintered filters. 4. Using stainless steel sand

Page 1 of 2

Go to Page

Related Manufacturers