Selling Leads from TARGE Tubeformer Co.,Ltd. China

TARGE Tubeformer Co.,Ltd. > Selling Leads

Member Since

2007

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

TARGE Tubeformer Co.,Ltd.

Elbow Making Machine

Minimum Elbow Diameter (mm) 150
Minimum Hoop Diameter (mm) 150
Maximum Sheet Thickness (mm) 1.2
Strip Speed (m/min) 4.55
Height From Worktable To Ground (mm) 850
Processing Object tube
Section Bending Machine

The angle steel flat steel bending machine, , may curl the corner iron according to be different
needs to replace the roller, the flat iron, three rollers when work may correct the roller gap, the
Seam Welding Machine

1. The main transformer is made of high-quality silicon steel sheet, and the mandatory water-cooling system can increase the out-put power as well as reducing the loss.
2. High-quality cylinder and
Plasma Cutting Machine

The frame is of a steel welded construction, with a vibration treated roil to reduce
internal stress, thus the frame is of good quality. X axis adopts high precision line
cycle guide, Y axis
Spiral Tubeformer

Product of TARGE- Spiral Tube former
Technical Data:
Model           TARGE1012
Tube Diameter       80-1500mm
Length of Strip     adjust as need
Thickness of Strip
Riveting Machine

TARGE YM-1 Elecreo-hydraulic riveting machine is a minitype tool that apply to
ventilation project,duct flange riventing.This machine has characteristics like small
and handiness,riventing
Rolling Machine

The WR series asymmetrical 3-rollers bending machine upper roller is hand-
adjusted up and down. The machine has a pre-bending function. Bending function
is hand driven, and the upper roller can
spiral tubeformer

Model           TARGE1012
Tube Diameter       80-1500mm
Length of Strip      adjusted as need.
Thickness of Strip    0.4-1.2mm
Width of Strip      137mm
Strip
Coner-Matic

* Thickness ; : 0.5t ~ 1.2t ; ; ; ;* Duct length : H900mm~H1,800mm ; ; ; ;* Duct size : W150mm*W150mm~∝ ; ; ; ;* Motor : 380V / 3P/ 50Hz /400W ; ; ; ;* Air Pressure : 0.5~0.7 kmp ; ; ; ;* Control
Spiral Tubeformer

Technical Data
Model
TARGE 2012

Tube Diameter
80-1500mm

Tube Length
100-8000mm(Can be adjusted as need.)

Strip Thickness
0.4-1.2mm

Strip Width
137mm

Processing

Page 1 of 1

Go to Page

Related Manufacturers