Selling Leads from BRO ELECTRIC APPLIANCE CO;LTD China

BRO ELECTRIC APPLIANCE CO;LTD > Selling Leads

Member Since

2006

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

BRO ELECTRIC APPLIANCE CO;LTD

E-9188D Ultrasonic Electric Spark Mould Polisher

Product profile:
E-9188D Skinwrinkle treatment automatic ultrasonic electric spark mould polisher is improved and developed on the basis of original E-9188 B polisher. This machine has not only kept the advantages of heavy power and high efficiency of original E - 9188 B type polisher, but also increases the functions of mould face skinwrinkle treatment, tool resonance frequency autotracks, the
E-9188C Ultrasonic Electric Mould Polisher

General:
The product adopts the latest international technology. It is a new generation of mould process equipment with the functions of frequency autotracking and power automatic compensation developed by our company. With new design, compact construction, good performance, convenient operation, visible digit-display, it is suitable most for the advanced tide of mould processing method. At pres
E-9188A Mould Repair Machine

Product introduction:
Along with the development of the world industrial art, the mould has already become the main tool of production in the relevant trade. But its a small amount of defect, collide, damage and accumulated wear and tear, etc, will cause abandon of the full mould, even the whole equipment. For this reason, our factory developed Type E-9188A repaired machine for wisdom and protec
E-9188B Mould Repaired Machine

the following advantages:
1. Strong melting and welding: Canning rub, milling, file, etc are processed after mending.
(point picture to zoom out)
2. High mend precision: Mending the material with the thin slice will not lose datum levels, there is little surplus solder, it is easy to plastic on later stage, the minimum mending amount is 0.03mm. the most mending more then 0.25mm,the machine
E-9188E 18 Induction Heating Machine

Product applied:
1.deeply the heat shaping:
A. Various standard a tight firmware and other machinepiece,hardware tool,handle dril,keep the hot upsetting.keep the hot cutting. it circle steel of the diameter 16 mms. heat 3s-5s or so proceeding to squeeze to squeeze to shaping then.
B. to the metals mate rial. to neat or to back the fire,in order to pull to stretch,the shape presses flower etc
E-9188E 18 Induction Heating Machine (E-9188E)

Main
The digit phase locked:
The digit phase locked the technique realizes the frequency if automatic to foolow.can adapt to every kind of inductor automatically
The module piece tu rns the design:
The adoption drives module a control.insu ring the dependable of the equipments. maintaining easily.
The resonance flaps to change frequency technique:
The adoption resonance flaps to change
E-9188D Ultrasonic Electric Spark Mould Polisher (E-9188D)

The technical parameter:
1 . Application scope: Polishing, from the shaping to lens face, of
various complicated type moulds cavities, narrow groove, narrow slot,
blind hole, plane and different kinds of hard alloys.
2 . Polished material: Various kinds of metal, hard alloy, glass, malachite
and agate, etc..
3 . The roughness of processing surface: 4 . Polishing medium: Artificial diam

Page 1 of 1

Go to Page

Related Manufacturers