Products Catalog | China National Abrasives Corp.(CAEC) China

Home > Product Catalog

Member Since

2005

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

China National Abrasives Corp.(CAEC)

Ceramic proppant

Ceramic proppant are used in the hydraulic fracturing process to increase the productivity of new and existing natural gas and oil wells. Their application include for a broad range of applications, for highest fracture conductivity to moderate depths, ideal for oil reserves, for low to moderately permeable wells with closure stresses to 14,000 psi, for high fracture conductivity in deep and hosti
Stabilized Zirconia

Our corp. uses advanced electro fusing technology to produce all kinds of zirconia materials stabilized by different stabilizing agents.
1.Z-95C It is a kind of CaO partial stabilized zirconia, which uses high purity zirconium dioxide chemical as raw material and stabilized by CaO. It can be used to make high class ZrO2 based refractory and ceramic products.
2.Z-94C It is a kind of CaO partial
HEXAGONAL BORON NITRIDE / boron nitride

HEXAGONAL BORON NITRIDE
HBN is a kind of white powder of loose, lubricious and easy moisture absorption with theoretical density 2.27g/cm3, Moh抯 hardness 2, low mechanical strength , but high than graphite. It has fine insulation, thermal conductivity, chemical corrosion resisting property, anti-oxygenation property and lubricating property. It has strong neutron absorbent power. Because of i
boron carbide

BORON CARBIDE is one of the hardest man-made materials available in commercial quantities that has a finite melting point low enough to permit its relatively easy fabrication into shapes.
BORON CARBIDE, due to its high hardness, chemical inertness, and high neutron absorption cross section, is well suited to a variety of industrial applications including:
High Purity BORON CARBIDE:
Wear part
silica fume / micro silica

Microsilica ( Silica Fume )
We are the leading manufacturer and supplier for Micro Silica. We have the densifier to help our customer to solve the transportation problem . Our micro silica are sold to many countries , almost 20 countries , which used for concrete , refractories , and we have obtained good reputation in the world .
About the detailed SiO2 content, bulk density, packing term,
MULLITE AND SPINEL

FUSED MULLITE AND SPINEL
Fused Mullite is produced by the electric furnace fusion of Bayer process alumina and high purity silica. The result is a needle-like alumina-silica grain that has low conductivity, excellent thermal shock resistance, and excellent resistance to deformation under load.
Fused Mullite is used in applications such as refractories for glass and steel industries, as kiln furn
Calcium Aluminate Cement / high alumina cement

Calcium Aluminate Cement(CA-50)
Overview of Product
The CA-50 series of calcium aluminate cement products are hydraulic binding agents with alumina contents about 50-60%.
Beacause CA phase (monocalcium aluminate) is the main mineral phase of the CA-50 series of cement products, these products have not only relatively excellent high-temperature service performance but also the characteristics
tabular alumina

Tabular Alumina is a pure sintered alpha-alumina material that has been fully densified by a rapid-sintering process. Tabular Alumina has extremely high refractoriness, high mechanical strength and abrasion resistance, very good chemical purity, excellent dielectric properties and good resistance against acid and alkali corrosion. It is the aggregate of choice in unshaped and shaped high performan
silicon carbide

Silicon Carbide (SiC) is produced in an electric furnace at temperatures in excess of 2200篊. SiC is produced by fusing coke and high purity silica sand. The result is the formation of SiC crystals which are very hard. SiC also has a very high thermal conductivity and is very strong at elevated temperatures.
SiC is used in a variety of industries including Bonded Abrasives (grinding wheels), Coate
brown aluminium oxide

Brown Fused AluminaBrown Fused Alumina (BFA) is produced in an electric arc furnace at temperatures in excess of 2000 . BFA is the result of fusing bauxite to reduce the silica levels and forming a

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.