Selling Leads from XIAMEN XIANGHAN CO.,LTD China

Home > Selling Leads

Member Since

2008

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

XIAMEN XIANGHAN CO.,LTD

1020-HIGH SPEED AUTOMATIC DIE-CUTTING

Features:1. ; ;Longitudinal and lateral foil stamping devices are equipped which make foil stamping process more reasonable.2. ; ;The longitudinal foil-delivering unit can be pulled out when you
ML 1500-930 HOT-CUTTING AND PRESSING MACHINE

Main Specification

Model
ML1500
ML1400
ML1300

Board-ark Inside Dimension
1500×1100mm
1400×1000mm
1300×920mm

heat-cutting line length

Heating Area
ML 1500-930 creasing and cutting machine

Model
ML1500
ML1400
ML1300

Board-ark Inside Dimension
1500×1100mm
1400×1100mm
1300×920mm

heat-cutting line length

Motor
TYMK 1100/930/720

For saving aluminium foil, decreasing pointing cycle, economicing and utilizing, the machine is an organic whole products integrated with machanical and electrical which is mic-computer controlled
TYMK 1100/1040/930 HOLOGRAPHIC ANTI-FORGERY LOCATING GLIDING PRESS

1、Capable to stamp up tp 6 draw of hologram at one time,individual fibre photo sensor for each draw on stamping spot to ensure accurate registration(3draw as standard).2、Latest electronic technology
800 DIE-CUTTING&CREASING MACHINE

1.Front guide is adjusted by step motor, easy operation and ensuring its high precision as well.2.The sheet-conveying unit adopts adjustable construction. ensuring speed and precision. especially
1050SF FULLY AUTOMATIC PUNCHING,DIE-CUTTING&WASTE-REMOVING&STAMPING MACHINE

Ability to steadily feed, die-cut and take off ;≥80g thin paper;8 suction and 8 delivery steps for feeder to ensure smooth delivery of paper;Nonstop fully automatic feeder and pre-piling station
800 AUTOMATIC FOIL STAMPING&DIE-CUTTING MACHINE

2.800X620mm format design especially suit for processing four cigarette boxes at the same time.3．It is used computer for foil step control system, foil convey accurately and tension is constant.
1020-H FOIL STAMPING AND DIE-CUTTING MACHINE

This kind of machine is a new generation of foil stamping series on the basis of TYM1020, it’s incorporated with fully automatic feeding, diecutting, stamping, delivering foil, delivering sheet,
1450 SEMI-AUTOMATIC DIE-CUTTING AND CREASING MACHINE

The machine uses programmable controller and interface, showing the working speed, number of sheet processed, the general running time and various troubles, which contributes to easy troubleshooting
FULLY AUTOMATIC PUNCHING,DIE-CUTTING,HOLOGRAPHIC STAMPING&STRIPPING MACHINE

XHBC-1050SFL automatic flatbed die-cutting machine, mainly used for die-c-utting of cardboard with high precision, press concave or protruding, the corrugated board thickness less than 4mm and
1050S PUNCHING DIE-CUTTING&WASTE-REMOVING MACHINE

Construction：On the basis of XHBC-1050S automatic diecutting and creasing machine XHBC-1050S automatic diecutting and stripping machine is mainly used for the diecutting, creasing, stripping, cold
1650 FULLY AUTOMATIC FLATBED DIE-CUTTING ANS CREASING MACHINE

DIECUTTING SECTION ; ; ·Precision upper and lower platen surface ; ; ·Crank and worm gear, toggle drive system for the lower platen ; ; ·Safety system for the diecutting section ; ; ·Pneumatic
1450 AUTOMATIC DIE-CUTTING AND CREASING MACHINE

The machine uses programmable controller and interface, showing the working speed, number of sheet processed, the general running time and various troubles, which contributes to easy troubleshooting
DWJ150-1800-2ply(FAST-CHANGE)

1、Model Type：DWJ150-1800-2ply(NC Cut).2、Maximum Mechanical Speed：150 m/min.3、Breath：1800 mm.4、Flute Type：UV.　mm Height.　300mm（may select flute A, B, C, BC, D, E, F alternate）
;5、Economical
DWJ60-1600 WARP BOARD PRODUCTION LINE

General Specifications:1、Speed, Maximum：60 m/min2、Effective Width：1600 mm 3、Flute Type：E flute .4、Steam Consumption：350 kg/h.Steam pressure：1.1-1.2 MPa.5、Power requirement：～ 35 KW ，～380V,
DOUBLE WALL CORRUGATED BOARD PRODUCTION LINE

Two flute combinations (A&;B, C&;B) as well as special customer-tailored flutes are provided. Steam heating and oil heating are optional (but oil heating is not suitable for line with speed above
SINGLE-WALL CORRUGATED BOARD PRODUCTION LINE

Four flutes A, B, C and E as well as special customer-tailored flutes are provided. Steam heating system and oil heating system are optional (but oil heating is not suitable for line with speed above

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.