Home > Selling Leads

FEIYUE UNITED GROUP CO. ,LTD

 
  • Air conditioner contactor
    Applications:
    Applications:Air conditioner contactor are suitable for electrical system of rated voltage of 220V/50 or 60Hz, rated current up to 40AUsed as to make 8 break or frequently start
  • CJ24 AC Contactor
    CJ24 AC Contactor
    ;
    Application:
    CJ24series AC contactors (contactor for short below) is designed for long-distance making and breaking in circuit, frequently starting, stopping, reversing and
  • CJ20  AC Contactor
    CJ20 series AC contactors (contactor for short below) is designed for long-distance making and breaking in circuit, frequently starting, stopping, reversing and controlling AC motor in the power
  • CJ40   AC Contactor
    CJ40 series AC contactors (contactors for short below) is designed for making and breaking in a electricity system of 50/60Hz, rated voltage up to 660/1140V and rated current up to 800A. The starter
  • LC1-D(new)  AC contactor
    CJX2 (LC1-D) series AC contactor (new) are suitable for frequency 50/60Hz, rated insulation voltage up to 1000v, rated operation current 9~330A under AC-3 duty, it's mainly used for making/breaking
  • GMC  B  S N  AC contactor (GMC)
    GMC series AC contactor is suitable for using in the circuits up to the rated voltage 660v AC 50Hz or 60Hz, rated current up to 95A, for making breaking, frequently starting & controlling the AC
  • CJ12 CJ24 CJ20 CJ40 AC Contactor
    CJ12 series AC contactors (contactor for short below) is designed for long-distance making and breaking in circuit, frequently starting, stopping, reversing and controlling AC motor in the power
  • ABB GMC   AC Contactor
    ABB series AC contactors are applicable for remote making and breaking of electrical lines or frequent control of AC motors., having no-voltage protection. Usually, it can be combined with T series
  • LC1-D  LC1-F (CJX2) AC contactor
    CJX2 (LC1-D) series AC contactor is suitable for using in the circuit up to the rated voltage 660V AC 50Hz or 60Hz, rated current up to 95A, for making, breaking, frequently starting & controlling
  • CK Series  AC Switched Contactor
    CK Series AC contactor is mainly applicable to a line of AC 50Hz or 60Hz, rated working voltage up to 600V and rated working current up to 60A, used to close or switch off the line.
  • LE1 QCX2   Starter
    QCX2 ( LE1) magnetic starter is mainly applied to circuit of AC 50 or 60Hz, voltage up to 550v for far distance making and breaking circuit and frequently starting and controlling motor. It has the
  • CJT1 CJ10  CJ20  AC Contactor
    CJT1 series AC contactors (contactors for short below) is designed for long-distance making and breaking frequently AC motor in the power system with frequency 50/60Hz, rated insulation voltage up to
  • IGBT Inverter DC SMAW/MMA Welder (ZX7 Series)
    Inverter technique makes the welder runs in high utilization rate of power, low open circuit loss and has good welding quality;
    Suitable for SMWA/MMA welding of low carbon steel and low alloy steel
  • IGBT Inverter DC GTAW/TIG Welder (WS series)
    Inverter technique makes the welder runs in high utilization rate of power, low open circuit loss and has good welding quality;
    Suitable for SMWA/MMA welding of low carbon steel and low alloy steel
  • Inverter DC Pulse GTAW / TIG Welder (WSM series)
    Suitable for welding of stainless steel, and the thickness of the welding plate should be in the range of 0.1-3mm;
    High frequence are initiation mode ensure the welder has high initiation rate;
    The
  • Air Plasma Cutter (LGK8 Series)
    Compressed air should be used as cutting gas source, high temperature and high concentrated plasma should be used as heating cource;
    Can be used to cut all kinds of conductive material into needed
  • Resistance Projection Welding Machine (TN Series)
    The machine is usually applyed in the field of multiple-spot welding, its high efficiency and stability keep the welding with high reliability;
    The machine is widely used in automobile, ship and
  • Portable Resistance Spot Welder (DNY Series)
    Suitable for welding carbon steel, stainless steel, galvanizing plate, etc., if add some flux and properly adjust the power source and weld time, the machine could be used for welding various ferrous
  • Resistance Seam Welding Machine (FN Series)
    Especially used for welding low carbon steel round-shaped parts that are not plating, also, for welding low alloy steel plate;
    This series machines have frequency conversion timing system, the axes
  • belt type connecting terminal
    We have hundreds kinds of connecting terminal, plasctic parts and component with high quality using for domestic appliance, communication, computer and motorcycle connector.
    Material: Brass,
 
Page 1 of 4
Go to Page
Cannot find what you're looking for? Post a buying lead.