Welding Machine

IGBT Inverter DC GTAW/TIG Welder (WS series)

Inverter technique makes the welder runs in high utilization rate of power, low open circuit loss and has good welding quality;
Suitable for SMWA/MMA welding of low carbon steel and low alloy steel
Inverter DC Pulse GTAW / TIG Welder (WSM series)

Suitable for welding of stainless steel, and the thickness of the welding plate should be in the range of 0.1-3mm;
High frequence are initiation mode ensure the welder has high initiation rate;
The
Air Plasma Cutter (LGK8 Series)

Compressed air should be used as cutting gas source, high temperature and high concentrated plasma should be used as heating cource;
Can be used to cut all kinds of conductive material into needed
Resistance Projection Welding Machine (TN Series)

The machine is usually applyed in the field of multiple-spot welding, its high efficiency and stability keep the welding with high reliability;
The machine is widely used in automobile, ship and
Portable Resistance Spot Welder (DNY Series)

Suitable for welding carbon steel, stainless steel, galvanizing plate, etc., if add some flux and properly adjust the power source and weld time, the machine could be used for welding various ferrous
Resistance Seam Welding Machine (FN Series)

Especially used for welding low carbon steel round-shaped parts that are not plating, also, for welding low alloy steel plate;
This series machines have frequency conversion timing system, the axes
3-Phase Rectifier Resistance Projection welder

three-Phase Rectifier Resistance Projection welder
IGBT Inverter DC SMAW/MMA Welder (ZX7 Series)

Inverter technique makes the welder runs in high utilization rate of power, low open circuit loss and has good welding quality;
Suitable for SMWA/MMA welding of low carbon steel and low alloy steel
Thyristor DC Arc Welding Machine (ZX5)

Suitable for DC SMAW/MMA welding with all kinds of electrode;
Easy to strike the arc without any adjustment;
Remote control for the welding current makes the operation be convenient;
Good
MIG / MAG Welding Machine (NB Series)

Semi-automatic MIG/MAG welder with thyristor module controler;
Suitable for welding of low carbon steel, low alloy steel , stainless steel, aluminum and its alloy, double driven roll wire feeder
Moving Core Type AC SMAW MMA Arc Welder (BX1)

Single phase moving core type and forced air colling struction;
Suitable for welding ferrous metal workpieces with general AC electrode;
Stable arc, less spatter and deep penetration can ensure
Pedal Type Resistance Spot Welding Machine (DN) (DN)

The main transformer has less power loss and its open circuit current is less;
Pedal-level type spring-pressing structure makes the machine easy to operate and convenient to maintain;
Thyristor
Mag/Co2 Arc Welder (NBC Series)(integrated structure)

Specially for welding of thin and mid-thickness steel;
Suitable for MAG/CO2 welding of low carbon steel and low alloy steel;
Inner wire feeder structure;
Work in high efficiency with good welding
Mag/Co2 Arc Welder (NBC Series)(separated structure)

Specially for welding of thin and mid-thickness steel;
Suitable for MAG/CO2 welding of low carbon steel and low alloy steel;
separated wire feeder structure;
Work in high efficiency with good
AC/DC ARC Welding Machine (ZXE1 series)

Suitable for AC/DC MMA welding with all kinds of electrode;
Convenient Stepless adjustment of welding current can ensure the stability of arc in different welding condition;
Suitable for welding of
Automatic Submerged Arc Welder (MZ Seires)

Power source adopts powerful thyristor, used for automatic submerged welding;
For butt welding, fillet welding with groove or without groove in horizontal or 10 degree angle slope;
Wide adjust
Pneumatic Resistance Spot/Projection Welder (DTN series)

The machine Controlled by micro-computer controller can work in high accuracy;
Six procedures within welding process which are squeezing, welding holding, welding, holding and off, can be adjusted
Flighten Resistance Butt Welding Machine

Be suitable for Welding low carbon steel workpiece with belt and round shape;
Micro-computer controllor with constant working current ensure the machine run in stable current condition, it helps to
Gantry Resistance Multiple-spot Welding Machine

Be suitable for welding large-sized steel net;
Micro-computer controllor with constant working current and PLC ensure that welding range can be adjusted, it helps to get reliable welding
Rotary Automatic Welding Machine

Be suitable for welding axes and other round-shape workpieces;
Collocated with different electric power, it can achieve arc welding, CO2 arc welding and submerged welding;
Frequency conversion

Page 1 of 2

Go to Page

Cannot find what you're looking for? Post a buying lead.