PCB

Printed circuit board (Manufacture)

Relative Techincs:
Layers: Six
Material: FR-4, high TG
Thickness of board: 1. 6mm
Finish coatting: Electrolytic Ni/Au
Min lead diameter: 0. 2mm(8mil)
Min width line: 0. 127mm(5mil)
Min space
8 layer PCB

Layer: 8 layers
Material:FR-4=1.0mm
Surface finish:HASL
Solder mask:Blue
Silk Screen:White
Finish:Immersion gold
Base Copper Thickness: 1 oz. To 2 oz.
1 Board Thickness: typically.575mm
PTH
Printed circuit board (Manufacturer)

Layers: Eight
Material: FR-4
Thickness of board: 1.0mm
Finishing coating: HAL+Immersion gold
Min hole size: 0.15mm
Min line space: 0.1mm
Special technics: Gold fingers
8 layers PCB (Factory)

Layer: Eight layer
Material: FR-4
Thickness: 1.0mm
Technic: HAL+ imersion gold
Min. Hole size: 0.15mm(6mil)
Min. Line sapce: 0.1mm(4mil)
Min. Line width: 0.1mm(4mil)
Special: Gold finger
PCB

material:FR-4=1.6mm
finish:flash gold
layer:six
gold finger
Used in mibile phone
Material:FR-4=1.6mm
Solder mask:Green
Silk Screen:White
Base Copper Thickness: 1 oz. To 2 oz.
1 Board
12 layers immersion gold PCB (Manufacturer)

Layer: 12 layers
Material: FR-4
Thickness: 1.6mm
Finish coatting: Immersion gold
Coopersize: 2 oz
2 layer PCB

2 layer PCB
pcb

12 layer PCB
PCB

Material:FR-4=1.6 mm
copper size:1 OZ
Finish:flash gold
layer:2
Soldermask:Green
PTH Hole Tolerance: Plus or Minus 0.05mm
Min Mechanical Hole: 0.2mm
Min Laser Drill Hole: 0.075mm
Minimum
pcb

16 layer PCB board
Material:FR-4=1.6mm
Solder mask:Green
Silk Screen:White
Finish:Immersion gold
Base Copper Thickness: 1 oz. To 2 oz.
1 Board Thickness: typically.575mm
PTH Hole Tolerance:
six layer gold finger pcb

six layer gold finger PCB
Material:FR-4=1.6mm
Solder mask:Green
Silk Screen:White
Finish:Immersion silver
Base Copper Thickness: 1 oz. To 2 oz.
1 Board Thickness: typically.575mm
PTH Hole
PCB

four layer BGA gold finger PCB
Material:FR-4=1.6mm
Solder mask:Green
Silk Screen:White
Finish:Immersion gold
Base Copper Thickness: 1 oz. To 2 oz.
1 Board Thickness: typically.575mm
PTH Hole
38 layer PCB (manufacture and producer)

layer: 38 layer PCB
material: FR-4
finish: sensitive green
technical: immersion gold
PCB

2 layer PCB
Material:FR-4=1.6mm
solder mask:Green
Silk screen:White
Finish:OSP
Copper size:1 OZ
PTH Hole Tolerance: Plus or Minus 0.05mm
Min Mechanical Hole: 0.2mm
Min Laser Drill Hole:
selling all kinds of pcb

It is a company established in 1998 in ShenZhen, China. It is specialized in manufacturing ROHS,HDI, thick gold blind/bury drill, high frequency, metal-clad bade, metal chip, surface resistor,
pcb

eight layer gold finger PCB

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.