Member Since

2008

Tianjin Master Logistic Facilities Co.,Ltd

 
  • Rolling Racking
    1,Suitable for storage in producting line or assembingline;
    2,Containers can slide along the roller because of gravity;
    3,Sroraging and taking goods is suitable for human bodies.
  • Middle Duty Racks
    1,Simple structure and nice appearance;
    2,Commonly storage light goods by hand ;
    3,Widely used in store.supermarket and other enterprises
    4,Can be assembled without using any screw connector;
    5,Load capacity: 200-400kg per layer;
    6,The layer height can be adjusted within per pitch (50mm)
  • Multi-tier racking
    1,Using Shelf or Bearing post as Supporting;
    2,Can be designed into 2 or 3 floors;
    3,Take a good vantage of warehouse;
    4,Widely used in Logistic center;Automobile fittings center or the corner of the warehouse.
  • Cantilever Racking
    Suitable for storaging long, circle, plate and irregular shape articles;
    Widely used in mechanical manufacture and architecture material supermarket enterprises.
  • Drive-in Racking
    CHARACTOR
    1, Drive-in Racking is also called Run-through racking;
    2, The loading capacity is higher than any other types.
    3, Storage few varieties and large quantities of similar goods with very high space utilization;
    4, Cargo can be storied and removed  the same side;
    5, Cargo also can be stored and moved  the opposite side in accordance with the first-in & first-out principle;
    6, For
  • Drive-in Racking
    CHARACTOR
    1, Drive-in Racking is also called Run-through racking;
    2, The loading capacity is higher than any other types.
    3, Storage few varieties and large quantities of similar goods with very high space utilization;
    4, Cargo can be storied and removed  the same side;
    5, Cargo also can be stored and moved  the opposite side in accordance with the first-in & first-out principle;
    6, For
  • Pallet Racking
    CHARACTOR
    1, This kind of racking is the most extensive type of general using.
    2, Composed of Upright Frame and Beam, Beam can adjusted between 50-70mm;
    3, Each 2 groups of shelves stand back to back;
    4, Each row has its own pass way (the width according to the different Fork- lift truck);
    5, Racks designing is based on the size of the Pallet, 2-3 pallets/ layer; bottom layer place
  • Heavy Duty racking
    CHARACTOR
    1, This kind of racking is the most extensive type of general using.
    2, Composed of Upright Frame and Beam, Beam can adjusted between 50-70mm;
    3, Each 2 groups of shelves stand back to back;
    4, Each row has its own pass way (the width according to the different Fork- lift truck);
    5, Racks designing is based on the size of the Pallet, 2-3 pallets/ layer; bottom layer place
  • Heavy Duty Racking
    CHARACTOR
    1, This kind of racking is the most extensive type of general using.
    2, Composed of Upright Frame and Beam, Beam can adjusted between 50-70mm;
    3, Each 2 groups of shelves stand back to back;
    4, Each row has its own pass way (the width according to the different Fork- lift truck);
    5, Racks designing is based on the size of the Pallet, 2-3 pallets/ layer; bottom layer place
  • Heavy Duty Racking
    CHARACTOR
    1, This kind of racking is the most extensive type of general using.
    2, Composed of Upright Frame and Beam, Beam can adjusted between 50-70mm;
    3, Each 2 groups of shelves stand back to back;
    4, Each row has its own pass way (the width according to the different Fork- lift truck);
    5, Racks designing is based on the size of the Pallet, 2-3 pallets/ layer; bottom layer place
 
Page 1 of 1
Go to Page

Related Manufacturers