Member Since

2008

Shenzhen Huaxin Precision Ceramics CO., LTD

 
  • ceramic knife
    Ceramic knife is made of zirconium, which is a kind of high technology and advanced material for high wearing industrial applications, because it is so hard that only diamond can be compared with it.
  • zirconia ceramic parts
    Zirconia has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges.Applications
  • tube and insulator
    Blending Strength: 280MPa/cm3
    Coefficient of Expansion ; : (6.5~8)*/°C
    Dielectric Strength: 5KV/mm
    Dielectric Constant: 8-10
    Al2O3 Content: 95%
    Volume Density ; ; 3.65g/cm3
    Rate of Volume
  • tube and insulator
    Blending Strength: 280MPa/cm3
    Coefficient of Expansion ; : (6.5~8)*/°C
    Dielectric Strength: 5KV/mm
    Dielectric Constant: 8-10
    Al2O3 Content: 95%
    Volume Density ; ; 3.65g/cm3
    Rate of Volume
  • ceramic bearing
    We are pleasure to manufacture and handle ceramic bearing and zirconia ceramic sleeves to conform customer's demands. We welcome all customers: local agents, manufacturers, distributors, and end
  • ceramic heater plates
    Blending Strength: 280MPa/cm3
    Coefficient of Expansion ; : (6.5~8)*/°C
    Dielectric Strength: 5KV/mm
    Dielectric Constant: 8-10
    Al2O3 Content: 95%
    Volume Density ; ; 3.65g/cm3
    Rate of Volume
  • industrial ceramic parts
    Zirconia has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges.Applications
  • zirconia ceramic
    Zirconia has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges.Applications
  • alumina ceramics
    we can supply industrial parts its ;content is ;95%-99% alumina oxide, it is widely using in mechanical parts, electrical parts.
    The industrial ceramic have good characters as high-intensity,
  • electronic ceramics
    Blending Strength: 280MPa/cm3
    Coefficient of Expansion ; : (6.5~8)*/°C
    Dielectric Strength: 5KV/mm
    Dielectric Constant: 8-10
    Al2O3 Content: 95%
    Volume Density ; ; 3.65g/cm3
    Rate of Volume
 
Page 1 of 2
Go to Page

Related Manufacturers