Member Since

2006

Nantong New Era Glass Manufacturing Group

 
  • Reflective Glass


     
    Features: 1) Use CVD technology (chemical vapor deposition) to create a perfectly uniform layer   of metal oxide chemically bonded to the surface of the glass 2) As this hard chemical layer is fully bonded to the glass, the glass can be cut, bent,   tempered, heat strengthened and laminated without affecting the coating 3) Available in a range of performances to meet most environmenta
  • Wired Glass


     
    Features: 1) Simply two pieces of glass, with wire mesh between them 2) Two pieces of glass are fused together 3) Cracking and broken pieces tend to remain in sashes instead of falling out 4) Can restrict the spread of flame and smoke 5) Appliances: fire rated assemblies (doors, windows); locations where fallout   protections are required
     
  • Laminated Glass


     
    Features: 1) Formed as a sandwich of 2 sheets of glass bonded to a tough and   thermoplastic PVB interlayer 2) Extremely high safety 3) The PVB interlayer withstands penetration by impact 4) Even if the glass cracks, splinters will stick to the interlayer and not scatter 5) Much higher strength to resist shock, burglary, burst and bullets 6) The interlayer impedes the transmission of so
  • Insulating Glass


     
    Features: 1) Made by fusing together 2 panes of glass spaced by dry air, argon or   other inert gases 2) Excellent efficiency in solar heat insulation, greatly lessens cooling load 3) The dry air inside the enclosure renders the surface free from misting 4) More excellent efficiency will be if filled in argon or other inert gases 5) Applications: architecture, trains, refrigerators 6) A
  • Fire-resistant Glass


     
    Features: 1) Fine transparency and fire resistant 2) Ideal fire resistant material for fire prevention doors, windows and partitions   incorporated in high standard hotels, cinemas, exhibition halls, airport halls,   gymnasiums, hospitals, libraries and business buildings
     
  • Heat-bending Glass


     
    Features: 1) Approximately twice as strong as annealed glass of similar thickness and   configuration 2) Generally fractures in a manner similar to annealed glass and tends to   remain in the opening when broken 3) Intended for general glazing where additional strength and/or resistance   to mechanical and/or thermal stress are desired 4) Not a safety glazing product and therefore s
  • Bullet-proof Glass


     
    Features: 1) Excellent in bullet resistance 2) Security products produced are ideal for storefronts, jewelry displays, banks,   prisons, auto security, and zoos 3) Laminated bulletproof glass is excellent in flexibility and impact strength resistance
     
  • Low-e Glass


     
    Features: 1) Can block the transmission of the radiant heat in tropical zone to keep   the interior cool 2) On the other hand, in frigid zone, it allows solar heat and light to pass through   the glass into the building and blocks heat from leaving the room, reducing heat   loss considerably 3) The vacuum sputtering process coats glass surfaces with several layers of   different m
  • Mirror


     
    Features: 1) Produced by coating a silver film, a copper film and two layers   of waterproof paint on the back of flat and parallel float glass 2) Clear and exact images 3) The blacking paint resists acid and moisture 4) Thickness: 2 - 6mm 5) Size: 3,660 x 2,440mm 6) Applications: decoration, furniture, rearview mirror
     
  • Table-top Glass


     
    We provide and customize table-top glass with various patterns.
     
  • Rolled Glass


     
    Features: 1) Made by patterned rollers which roll over glass plates when they are still hot   and moldable 2) Provides not only the function of visual screen but also the aesthetic function   of changing lights and shades 3) Numerous patterns are available to meet decoration needs 4) The patterns are able to soften the light in a space 5) Applications: furniture and show shelves; area
  • Ceramic Glass


     
    ceramic glass is made by printing inorganic coloring ink on float glass and by heating to fuse the coloring into the glass surface ,the glass is stable ,durables and colorful features   various colors,stable and durable   ceramic glass offers designers a wide range of color choices ,aesthetic value and variety ,inorganic colorant assures stable color  energy -saving   ceramic gla
  • Tinted Glass


     
    Features: 1) Made by patterned rollers which roll over glass plates when they are still hot and moldable 2) Provides not only the function of visual screen but also the aesthetic function of changing lights and shades 3) Numerous patterns are available to meet decoration needs 4) The patterns are able to soften the light in a space 5) Applications: furniture and show shelves; areas where
  • Float Glass


     
    Features: 1) Produced by mixing sand and sodium carbonate, heated to   a temperature of over 1,500 °C and floated in molten state over a tin bath 2) Colors: clear, bronze, grey, green, blue 3) Thickness: 1.8 - 15mm 4) Sheet size: 330 x 225cm 5) Suitable for tempering, bending and laminating
     
  • Tempered Glass


     
    Features: 1) One kind of high-strength glass that is heated to softening, then condensed   quickly by cold wind with the same thickness 2) Bending strength is 5-6 times as powerful as common glass 3) The most eminent advantage of tempered glass is safety 4) Like honeycombs after crashing, so as to avoid harming 5) Can be widely used in skyscrapers, vehicles, automobile staircases and 
  • Float Glass


     
    Features: 1) Produced by mixing sand and sodium carbonate, heated to   a temperature of over 1,500 °C and floated in molten state over a tin bath 2) Colors: clear, bronze, grey, green, blue 3) Thickness: 1.8 - 15mm 4) Sheet size: 330 x 225cm 5) Suitable for tempering, bending and laminating
     
  • Tempered Glass


     
    Features: 1) One kind of high-strength glass that is heated to softening, then condensed   quickly by cold wind with the same thickness 2) Bending strength is 5-6 times as powerful as common glass 3) The most eminent advantage of tempered glass is safety 4) Like honeycombs after crashing, so as to avoid harming 5) Can be widely used in skyscrapers, vehicles, automobile staircases and 
  • Wired Glass


     
    Features: 1) Simply two pieces of glass, with wire mesh between them 2) Two pieces of glass are fused together 3) Cracking and broken pieces tend to remain in sashes instead of falling out 4) Can restrict the spread of flame and smoke 5) Appliances: fire rated assemblies (doors, windows); locations where fallout   protections are required
     
  • Reflective Glass


     
    Features: 1) Use CVD technology (chemical vapor deposition) to create a perfectly uniform layer   of metal oxide chemically bonded to the surface of the glass 2) As this hard chemical layer is fully bonded to the glass, the glass can be cut, bent,   tempered, heat strengthened and laminated without affecting the coating 3) Available in a range of performances to meet most environmenta
  • Laminated Glass


     
    Features: 1) Formed as a sandwich of 2 sheets of glass bonded to a tough and   thermoplastic PVB interlayer 2) Extremely high safety 3) The PVB interlayer withstands penetration by impact 4) Even if the glass cracks, splinters will stick to the interlayer and not scatter 5) Much higher strength to resist shock, burglary, burst and bullets 6) The interlayer impedes the transmission of so
  • Insulating Glass


     
    Features: 1) Made by fusing together 2 panes of glass spaced by dry air, argon or   other inert gases 2) Excellent efficiency in solar heat insulation, greatly lessens cooling load 3) The dry air inside the enclosure renders the surface free from misting 4) More excellent efficiency will be if filled in argon or other inert gases 5) Applications: architecture, trains, refrigerators 6) A
  • Fire-resistant Glass


     
    Features: 1) Fine transparency and fire resistant 2) Ideal fire resistant material for fire prevention doors, windows and partitions   incorporated in high standard hotels, cinemas, exhibition halls, airport halls,   gymnasiums, hospitals, libraries and business buildings
     
  • Heat-bending Glass


     
    Features: 1) Approximately twice as strong as annealed glass of similar thickness and   configuration 2) Generally fractures in a manner similar to annealed glass and tends to   remain in the opening when broken 3) Intended for general glazing where additional strength and/or resistance   to mechanical and/or thermal stress are desired 4) Not a safety glazing product and therefore s
  • Bullet-proof Glass


     
    Features: 1) Excellent in bullet resistance 2) Security products produced are ideal for storefronts, jewelry displays, banks,   prisons, auto security, and zoos 3) Laminated bulletproof glass is excellent in flexibility and impact strength resistance
     
  • Low-e Glass


     
    Features: 1) Can block the transmission of the radiant heat in tropical zone to keep   the interior cool 2) On the other hand, in frigid zone, it allows solar heat and light to pass through   the glass into the building and blocks heat from leaving the room, reducing heat   loss considerably 3) The vacuum sputtering process coats glass surfaces with several layers of   different m
  • Mirror


     
    Features: 1) Produced by coating a silver film, a copper film and two layers   of waterproof paint on the back of flat and parallel float glass 2) Clear and exact images 3) The blacking paint resists acid and moisture 4) Thickness: 2 - 6mm 5) Size: 3,660 x 2,440mm 6) Applications: decoration, furniture, rearview mirror
     
  • Table-top Glass


     
    We provide and customize table-top glass with various patterns.
     
  • Rolled Glass


     
    Features: 1) Made by patterned rollers which roll over glass plates when they are still hot   and moldable 2) Provides not only the function of visual screen but also the aesthetic function   of changing lights and shades 3) Numerous patterns are available to meet decoration needs 4) The patterns are able to soften the light in a space 5) Applications: furniture and show shelves; area
  • Ceramic Glass


     
    ceramic glass is made by printing inorganic coloring ink on float glass and by heating to fuse the coloring into the glass surface ,the glass is stable ,durables and colorful features   various colors,stable and durable   ceramic glass offers designers a wide range of color choices ,aesthetic value and variety ,inorganic colorant assures stable color  energy -saving   ceramic gla
  • Tinted Glass


     
    Features: 1) Made by patterned rollers which roll over glass plates when they are still hot and moldable 2) Provides not only the function of visual screen but also the aesthetic function of changing lights and shades 3) Numerous patterns are available to meet decoration needs 4) The patterns are able to soften the light in a space 5) Applications: furniture and show shelves; areas where
 
Page 1 of 1
Go to Page

Related Manufacturers