Products Catalog | Jinmuyu Electronics Co., Ltd. China

Jinmuyu Electronics Co., Ltd. > Product Catalog

Member Since

2008

Company Home
Company Profile
Product Catalog: OMT700 Contactless smart card reader [1]; Access control readers [2]; MR600 Series smart card readers(with LED display [1]; OMT800 Series RFID Read/Write Module [1]
Selling Leads
Contact

Jinmuyu Electronics Co., Ltd.

Access Control Reader

501 series RF card reader can read and write in line with the ISO14443 standard and non-contact IC card in line with the ISO15693 standard RFID tag electron to support the type of card there is:
rfid reader module

The chip is PHILIPS' LSI MF RC500Compliant with the standard of ISO14443 TYPE-AOnly need to send a command over UART/IIC can completely implement all the functions of the card.512 Bytes EEPROMThe
Antenna

Company Profile:[b]JINMUYU ELECTRONICS CO., LTD. [/b]BEIJING CHINA is a high technical supplier founded in 2003, specializing in the development, manufacture, marketing of IC cards, IC card-related
PDA card reader

Characteristics: Technical solution to the RFID electronic tag attached to metal surfaces should not use problems. A variety of packages available. Products can be waterproof,
Animal Tag

Characteristics: Technical solution to the RFID electronic tag attached to metal surfaces should not use problems. A variety of packages available. Products can be waterproof, anti-acid, anti-alkali,
Anti-Electron Tag Metal

Characteristics: Technical solution to the RFID electronic tag attached to metal surfaces should not use problems. A variety of packages available. Products can be waterproof,
Anti-Electron Tag Metal

Anti-electron tag metal
Metal anti-electron tag, anti-electron tag metal
RFID tag anti-electron metal (13.56MHz), also kn
Electronic Label

RFID wristband Electronics for electronic medical record system, electronic management systems and hospital-patient management s
AT88RF020

AT88RF020 is the RFID card of the 2 generation 13.56 MHzes of ATMEL company's production, compatible with ISO14443 TYPE-B standard. Inlay capacity, card consistency good. -----------------------------
MR701 Contactless Card Reader

DescriptionThe series of mr701 rfid reader/ proximity reader make use of philips 's sl rc400; mf rc500; mf rc531 and cl rc632 for pcd, its can read and write contactless cards that compliant with the
Chips

DescriptionMF RC500 is low cost, high to integrate, high-performance contactless Mifare read and write chip compliant with ISO14443 standard. Because of the contactless communication mode of 13.56M,
Supyly Mifare One Card

DescriptionMifare one, Divided into 16 sectors, each sector is 4, each 16 bytes, regard one as and deposit and withdraw the unit. Each sector have independent two group KEY that can operating
Supply Abnormity RFID Card

JMY-A Encapsulated the chip coil and packed the epoxy resin by the outer cover of ABS, welded making up through ultrasonic wave , special-shaped card with various kinds of model . CHIP: EM MF Temic
JMY-680 RF module

Description Compliant with the standard of iso14443 type-a Seek the card automatically, only need to judge the level of icc pin and knowing whether there are cards in the aerial area. Only need to
MR600 Contactless Card Reader

DESCRIPTION The series of MR600 RF reader make use of PHILIPS's SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and writecontactless cards that compliant withthe standard of
MR701Contactless Card Reader

The series of MR701 RF reader make use of PHILIPS 's SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and write contactless cards that compliant with the standard of ISO1443-A/B(include
RFID modules

JMY-5xx Mifare read and write module is the micro-embed、contactless IC card module that designed base on contactless technical of PHILIPS .And the inside of the module inlay MF RC500 or MF RC530 PCD
RFID Reader/Writer (with LED display)

MR600 RF readers make use of Philips’s SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and write contactless cards that compliant with the standard of ISO1443-A/B (include double
RFID Reader/Writer

The series of MR701 RF Reader make use of Philip SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, It can read and write contactless cards that compliant with the standard of ISO14443 TYPE-A and TYPE

Page 1 of 1

Go to Page

Related Manufacturers