Selling Leads from Jiangxi Cambrios Special Metals Technologies Co.,Ltd China

Jiangxi Cambrios Special Metals Technologies Co.,Ltd > Selling Leads

Member Since

2007

Company Home
Company Profile
Product Catalog
Selling Leads: grain refiner series [8]; element additive series [11]
Contact

Jiangxi Cambrios Special Metals Technologies Co.,Ltd

Manganese Additive (1)

It is used for element addition of nonferrous metal alloys. It melts fast under normal temperature when putting into the melting liquid. It is simple for use and the recovery rate is more than 90%.
Form:tablet
Type: 75%, 80%, 85%.
titanium additive

Type:75%,80%,85%
It is used for element addition of nonferrous metal alloys. It melts fast when putting into the melt under normal melting temperature(usually less than 10 minutes. It is simple for use and the recovery rate element in additive is more than 90%).
Package:20kg/box,2kg/inner plastic bag
Rare Earth Aluminium Titanium Boron Refiner (AlTiBRe)

Rare Earth Aluminium Titanium Boron Refiner is applicable to aluminium plate, strip, foil, profile, bar and castings industries. It can refine pure aluminium and aluminium alloy grains with attenuation time between 4-8 hours.
Aluminium Titanium Carbon Refiner (AlTi6C0.5)

Aluminium Titanium Carbon Refiner has lasting refining capacity and strong effect. The internal compositon and metallographic structure without segregation, clustering and inclusion phenomena.
Aluminium Titanium Boron Refiner (AlTi5B1)

Type:AlTi5B1(piece,wire)
It is applicable to fusion casting of deformed aluminium alloy, especially 3003, 6063 alloy and pure aluminium.It shall be put in by separating aluminium slag, which must be mixed evenly.
Titanium Boron Refiner (40Ti4B)

Type:40Ti4B 75Ti,75TiB 60Ti,60TiB
It is applicable to fusion casting of deformed aluminium alloy, especially 3003, 6063 alloy and pure aluminium.It shall be put in by separating aluminium slag, which must be mixed evenly.
Fast melt silicon

Type:95%,740C,low temperature fast melting.
It is used for element addition of nonferrous metal alloys. It melts fast when putting into the melt under normal melting temperature(usually less than 10 minutes. It is simple for use and the recovery rate element in additive is more than 90%).
Package:20kg/box,2kg/inner plastic bag
Zinc additive

Type:75%,80%,85%
It is used for element addition of nonferrous metal alloys. It melts fast when putting into the melt under normal melting temperature(usually less than 10 minutes. It is simple for use and the recovery rate element in additive is more than 90%).
Package:20kg/box,2kg/inner plastic bag
Ziconium additive

Type:10%,20%,75%
It is used for element addition of nonferrous metal alloys. It melts fast when putting into the melt under normal melting temperature(usually less than 10 minutes. It is simple for use and the recovery rate element in additive is more than 90%).
Package:20kg/box,2kg/inner plastic bag
Chrome additive

Type:75%,80%,85%
It is used for element addition of nonferrous metal alloys. It melts fast when putting into the melt under normal melting temperature(usually less than 10 minutes. It is simple for use and the recovery rate element in additive is more than 90%).
Package:20kg/bax,2kg/inner plastic bag

Page 1 of 3

Go to Page

Related Manufacturers