Selling Leads from Qingdao Yadong Rubber Machinery Group Co., Ltd. China

Home > Selling Leads

Member Since

2008

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

Qingdao Yadong Rubber Machinery Group Co., Ltd.

mixing mill-A

The machine main uses are following in rubber product factory: Natural rubber refining, raw rubber and compound mixing. Rubber beating mixing and rubber tab letting.
This machine is double roller
Rubber refiner mill

The machine is mainly used for refining of reclaimed rubber and rubber sheeting. The rolls are made of chilled alloy cast iron with Wear-resistant hard surfaces. The two rolls are smooth ones with
Cracker Mill/Crusher

For crude and fine breaking rubber black and waste collection.
Feature: 1.Being made of cold hard alloy castiron, the roll wears well.The rolls have 3 types:Double-channeled roll, single-channeled
Plate Vulcanizer (Frame )

The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products.
The machine is in frame structure with below pressing form (upwards). Under the
Plate Vulcanizer (Column)

This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products.
Being a column structure and downward pressing type, the heating plate
Multi-function Court Lawn

Whether it is rugby, soccer, field hockey, or baseball, all sports will need a safe, consistent surface, which will be conducive to their play. Our artificial products will solve the problem and
Grinding Mill

Feature:1/ the roll is made of chilled cast iron of vanadlum and tltanlum alloy, so the surface is hard and wearable; the internal processing can make the temperature of the roll surface
Rubber Strainer

1.XJL-150A and XJL-250 strainer can strain mixed stock, raw rubber and buty 1 rubber for inner tube.1) The serew and bushes are nitrided, high hardness and long service life.2) The barrel with
mixing mill with stock blender

The machine, matched with folding back device, takes place of manpower to fold back and pack to reduce labor intensity. Adopting Korea technology, it has reached domestic advanced level. Besides,
Banbury Intensive Kneader

It can be applied in the separate or mixing refining of raw glue, mix glue, rubber, plastic and other raw materials to manufacture various rubber products such as EVA frothing soles, rubber soles,
Mixing Mill H

By Korea-imported technology, the new opening-style rubber-mixing machine has advantages of stable structure, strong mixing-capacity and others
Bale Cutter

This bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of
Rubber Extruder Machine

For profiling of extrudand, rubber covering of filter cable of rubber compound, rubber covering of press plate tinsel, etc.
The machine is hot-feed and single screw extruder. The rotation speed
Tyre Press

Type YLL-600 YLL-1000 YLL-1200
Total Pressure 60t 100t 120t
Working layer number 2 2 2
Steam chamber intemal dia.(mm) 820 830 840
Piston(mm) 250 300 360
High Pressure(Mpa) 13 14 14
Low
Mixing Mill-B

The machine is new-type rubber mixing machine with double rollers. Transmission gear of speed reducer is assistantly installed within the right frame and main transmission gear is set in the space
Rubber Soling Sheet

Performance:: highly wearableUse: shoe sole Dimension: 60~1200mm60~1200mm(LW)Density: 1.35g/cmHardness: 82 shore ATensile stretch: 2.8 MPaAbrasion: 400mm3Black rubber soling sheet with good quality
Reclaimed Rubber

We are in a position to supply fine and super fine reclaimed rubber, the main technical specifications as follows: Grade One: 1.Superfine 2.Stretch intensity9.5mpa 3.Stretch rate:390% Grade Two:
Belt Joint Press

Parameter/ Specification ; ; ; ; ; ; ; ; ; ; ; ; ; XLE-Q1250x2050 ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; XLE-Q1000x1400 clamp capacity(MN) ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; 10.00 ; ; ; ; ; ; ; ;
Hydraulic Press for Conveyor Belt

Type:XLB-5700x1(2)Nominal mold clamping force(MN)28.00 Specification of hot plates(mm)1400x5700x80 Space between hot plates( mm) 200-400 Unit area pressure of hot plate(kg/cm2) 35.0 plunger diameter

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.