Home > Selling Leads

Qingdao Powtech Electronics Co., Ltd.

 
  • Main Distributon Frame
    128pair MDF  is mounted on the horizontal side of PXJ49VI MDF used for termination between jumper wire and internal exchange cable,   Main features: (1) The performance of anti-burn: PPT
  • Cable Tray
    Offer cable tray with different sizes and types:
    Cable tray type A;
    Cable tray type B;
    Cable tray type C;
    1.8mm, 2.0mm. 2.2mm, 2.5mm, 3.0mm
     
  • Main Distribution Frame (MDF)
    Moduar distribution fames, which can either, be wall mounted or installed back-to-back for free standing applications. These frames are available in single and double vertical versions. The following
  • 10 pair STG Module
    1. ; ; ; ; ; ; ; Conductor diameter: 0.4-0.8 mm;
    2. ; ; ; ; ; ; ; Dielectric strength: 4.5 KV
    3. ; ; ; ; ; ; ; Reliability: >; 200 times
    4. ; ; ; ; ; ; ; Contact resistance:
    5. ; ; ; ; ; ; ;
  • Outdoor Cross Connection Cabinet
    The product is suitable for the connection between main cables and distribution cables of local telephone network and other broadband network.
    Main features:
    (1) Capacity: 100pairs to 4800pairs
  • Disbribution Box
    Capacity: 10pair, ;30pair, 50pair and 100pair ;
    ;
    Main features:
    l ; ; ; ; ; ; ; Boxes are compression molding with sealed rubber at the cable entrance
    l ; ; ; ; ; ; ; Easy to operate and
  • On-line UPS
    PQZ Series On-line Double Conversion UPS High performance power protection with scalable runtime for industrial applications, automation control, and critical manufacturing process Range: 2to 60kVA
  • Offgrid Inverters for Solar PV and Wind Turbine
    ;Offgrid inverters for Solar PV and Wind Turbine:
    (1) True sine wave output
    (2) Micro-processor control
    (3)
  • Grid tie inverter for solar PV and wind turbine
    Range: 1.5KW ~ 100KW
    Main features:
    (1) Using the fifth generation intelligent Power Module from Mitsubishi, improve the system efficiency
    (2) MPPT auto-optimizing technique makes the most of the
  • Suspension clamp for ADSS and OPGW
    Suspension clamps for ADSS/OPGW with span 100m, 200m, 400m, 500m, 600m
    Configuration: Rubber insert, housing, anchor shackle, armor rod, nuts and screws...
  • Tangent clamp for ADSS
    (1) for short span ADSS
    (2) simple structure
    (3) convenient installation
  • Dead-ends for ADSS and OPGW
    Dead-ends for ADSS and OPGW with span 100m, 200m, 400m, 500m, 600m
    Configuration: Dead-end rod, Clevis thimble, Anchor shackle, nuts and screws
  • Battery Charger and Tester (QN01)


     
    1\Application Intelligent battery capacity test system is applied for testing 12~60V battery banks, especially the 24V or 48VDC battery bank, which are mainly used in a telecom switch power supply, DC uninterruptible power supply, UPS and Emergency Power Supply (EPS). 2\Main features 1. Reliable and efficient battery capacity test with real time comprehensive testing and analysis (battery
 
Page 1 of 1
Go to Page
Cannot find what you're looking for? Post a buying lead.