Member Since

2006

Sentai Electrical Apparatus Factory

 
  • LR2-D Thermal Relay (LR2-D)
    This series of thermal relay can be used in the circuit of 50Hz or 60Hz, rated insulation voltage 660V, rate current 0. 1-93A for protecting the phase break when the electric motor is overload.
    The relay has different mechanism and temperature compensation & can be pluged in LC1-D series AC contactor. It is the most advanced thermal relay in the nineties in the world.
  • 3UA Thermal Relay (3UA)
    3UA series thermal relay is suitable fro using in power system with AC 50Hz, rated operation voltage up to 660V and 1000V, in main circuit, current from 0. 1A to 630A. It is used to pretect AC three-phase asynchronous motor against overload and open-phase.
    The relays have the test push-button for breaking NC contacts and the operating indication and free trip characterstics. The products also
  • NS Series Moulded Case Circuit Breaker (NS)
    NS series mounded case circuit breaker is one of the most advanced type breakers in the world, which adopt international advanced design and manufacture technology They are suitable for short circuit and overload protection for circuit of AC 690V 50/60Hz rated current from 12. 5A to 630A, it takes protect effect when mouse cage motors non-frequent start, breaking off working and protecting overloa
  • F360 Earth Leakage Circuit Breaker (F364)
    The item is in accordance with standards of VDE 0664, CEE27 and BS4293 etc., applying to the circuit of AC 50/60Hz, 240V single phase 415V three phases and below it for industrial and mining enterprise, building trade, commerce and family. To mainly prevent electric fire and personal casualty accident caused by personal electric shock or leakage of electrified wire netting, this ELCB is a current-
  • Copper Terminal (SC)
    There products are suitable for the connection of copper conductors (section 1.5-1000mm2) in power cable with electronic equipment they are made of with higher 99.9 percent pure copper tube T2 and coated with tin. Working temperature -55 to 150.
  • NFIN Earth Leakage Circuit Breaker
    The Residual Current Device (RCD) NFIN is in conformity with the standards of IEC 1008, VDE 0664, CEE27 and BS 4293. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line, thus it is suitable to avoid the shock hazard and fire caused by earth leakage. NFIN RCD is mainly suitable for using in varieties of plants, enterprises, buildings, construc
  • DTL COPPER-ALUMINIUM CONNECTING TERMINALS
    DTL series of copper-aluminium wiring terminals are suitable for transition connection of the circular aluminium wires,hemicycle-sector aluminium wires,power supply cable in the distribution equipment and copper terminals of the electrical equipment.The material of aluminium and copper is that of L3 and T2 respectively.The technology of friction welding is wonderfully adopted. Therefore they have
  • PC-PLUG SOCKETS (plug)
    Model: 013, 2P+E, 16A,220-240V,IP44
    Model: 023, 2P+E, 32A,220-240V,IP44
    Model: 014, 3P+E, 16A,380-415V,IP44
    Model: 024, 3P+E, 32A,380-415V,IP44
    Model: 015, 3P+E+N,16A,220-380V,IP44
    Model: 025, 3P+E+N,32A,240-415V,IP44
  • NT H.R.C Low Voltage Fuse And Base
    TYPE       RATED CURRENT
    NT00       2-100A
    NT0        6-160A
    NT1        80-250A
    NT-2       125-400A
    NT-3       315-500A
    NT-4       1000A
  • COPPER-ALUMINIUM CONNECTING TERMINALS
    Connecting terminals are suitable for the conjunction of wires,cables in the distribution equipment and the electrical equipment. DL series of aluminium connecting terminals are pressed with aluminium bar(L3),DT series of copper connecting terminals with copper bar(T2).
 
Page 1 of 2
Go to Page

Related Manufacturers