standard bearing

Needle roller bearing (Needle roller bearing)

Widely used in motorcycles, mopeds, automobiles, and power/pneumatic. Tools, high industrial/engineering and printing machinery,
Machine tools, etc.
Self-aligning bearing (Self-aligning bearing)

High load capacity, regardless of radial or axial load from any direction. Self-alignment ability enables the bearing to normally operate even when shaft and housing are misaligned, that could be
Angular contact bearing (Angular contact bearing)

A single angular contact ball bearing can bear thrust load only from a certain direction, so that it is usually combined to use with another angular contact ball bearing to balance thrust load, and
Cylindrical roller bearing (Cylindrical roller bearing)

Low operating friction and high limiting speed. Able to make it higher rotating accuracy and quite low vibration level. Sensitive to installation that their load capacity and service life would be
Deep groove ball bearing (Deep groove ball bearing)

Be used for bearing radial load mainly and certain thrust load from any direction. Lower manufacturing cost and price. Low operating friction and high limiting speed. Able to make it higher rotating
Tapered roller bearing (Tapered roller bearing)

The inner and outer ring raceways and rollers of these bearings are made with a taper so that the surface planes of the raceways And roller axis meet at a point. A flange guides the rollers on the
Angular contact bearing (Angular contact bearing)

Load capacities are higher than deep groove ball bearings of same dimensions. Be used for bearing radial-axial combined load or pure thrust load and their Low operating friction and high limiting
Joint bearing (Joint bearing)

A slide couple composed of inner ring and outer ring is able to rotate in 3 dimensions, and to bear radial, axial, or radial-axial combined load (depend on its construction) within slow speed.
Spherical Ball Bearing Inserts (Spherical Ball Bearing Inserts)

Insert bearings are designed in almost the same way as deep groove ball bearings, except that the outer ring is spherical. Their design allows the bearings to be easily mounted in a housing block and
Thrust ball bearing (Thrust bearing)

The thrust ball bearing can bear axial load, but cannot bear any radial load. According to the need, the seat circle is a level pattern or a sphere pattern. The sphere seat circle of the bearing
Self-aligning ball bearing (Self-aligning ball bearing)

Have self-alignment ability can compensate different heart degree and axle error that deflection lead to the fact

Page 1 of 1

Go to Page

Cannot find what you're looking for? Post a buying lead.