Member Since

2008

China Sunway Sealing Material Factory

 
  • PTFE PACKING
    PTFE PACKING SWP804 PTFE BRAIDED PACKING WITH GRAPHITE is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of
  • NON-ASBESTOS GASKETS
    Service range: Style Temperature Pressure Non-Asbestos Gaskets( carbon fibre+NBR ) 450 ℃ 130bar Non-Asbestos Gaskets( fiberglass+ synthetic rubber ) 480℃ 100bar Non-Asbestos Gaskets( Kevlar
  • PTFE GASKET




    Discription
    unit
    index

    surfaceconsistency
    g/cm3
    2.10-2.20

    ≥extendintensity
    MPa
    25

    ≥rupture elongate rate
    %
    300
     
  • OVER RING JOINT GASKET
    Type Pressure Mpa Oval 70 Octogonal 70 Rx 70 Bx 150Material: Material Identification Max,Hard Temperature(°C) SoftIron D 90 540 Low Carbon Steel S 120 540 5Cr0.5Mo A182
  • Carbonized Fiber Packing
    Carbonized Fiber Packing Braided from shrink-proof oxdized polyacrylonitrile fiber impregnated with PTFE dispersion containing graphite particles,silicon-oil-free,Compared to traditional carbon
  • Double Jacketed Gasket
    Metal Jacketed gasket(MJG)is made from graphite, ceramic, non-asbestos etc. filler covered with thin metal jacket, such as stainless teel, carbon steel, copper etc., special used in sealing spots
  • Reimforced Graphite sheet
    Serial NO. Name 1 Sealing sheet with perforated 0.1mm SS316 inserted 2 Sealing sheet with perforated 0.1mm SS304 inserted 3 Sealing sheet with perforated 0.2-0.25mm ordinary carbon steel
  • Aramid Fiber Packing
    P1002 Aramid Fiber Packing Braided from high quality aramid fibers with PTFE-lmpregnation and lunricant additive.Extremely hard wearing.It shows good chemical resistance,high elasticity and very
  • SPIRAL WOUND GASKET
    Spiral wound gaskets type: Type Thickness(mm) Basic form 3.2 4.5 With inner ring   4.5 With outer ring   4.5 With inner and outer ring   4.5 Filler Hoop Inner
 
Page 1 of 1
Go to Page

Related Manufacturers