Home > Product Catalog

Member Since

2006

Cixi Donde Packing and Gasket Factory(original Ningbo Sinklan Industry and Trade Co,. ltd)

 
  • Metal Gasket/Non-Metal Gasket/Copper Gasket/Mica Gasket/Mineralic Gasket
    We can supply you with many kinds of metal gasket,non-metal gasket and other kind of seals gasket.These metal or non-metal gasket are made of different kinds of metal,non-metal or mineral gasket
  • Metal Jacketed Gasket
    There are many kinds of non-metal gaskets.They are widely used in the sealing of many liquid or air.But those gaskets are not stronge enough to bear the high compressure and high temperature.We can
  • Molded seals Packing Ring
    Molded Packing Ring is made from different kinds of packing.This kind of molded packing is easy to install and have high strength and density.So they are able to bear higher pressure.All gland packing
  • Spiral Wound Gaskets
    Spiral Wound Gaskets can be used to seal fluid pressure up to 250 bar cryoprnices temperature as low as -200°C and up to elevated temperature of 1000°C. Spiral Wound Gaskets are widely used in the
  • Kevlar fiber braided packing
    Kevlar fiber braided packing
    Kevlar fiber braided packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant, braided into square cross section. As the strength and module of Kevlar is as high as the steel-like strength. So this packing combined with other kinds of braided packing, they can resist more serve media and higher pressure. It can be installe
  • Synthetic fiber packing
    Synthetic fiber packing
    Arcylic fiber packing
    Braided from high strength arcylic synthetic fiber pre-impregnated with PTFE, and re-impregnated during square braiding. It has excellent properties of sealing, lubricating and resistance to chemicals.
    Arcylic fiber packing treated with graphite
    Braided of high strength Arcylic synthetic fiber, treated with graphite and special lubrication.Much of
  • PTFE PACKING
    PTFE PACKING:
    PURE PTFE FIBER BRAIDED PACKING
    Pure PTFE fiber braided packing is a braided packing made of PTFE yarn without soaking any PTFE dispersion and lubrication but with greatly enhanced ability to seal high speed shafts with the addition of inactive and heat-resisting agents. It is recommended for chemical engineering, food-stuff, Pharmaceutics where contamination is not allowed. Also
  • PTFE envelope gasket
    PTFE envelope gasket are type of static seal. It is composed of elastic materials such as compressed non-asbestos sheet ,rubber,Ceramics, etc., and a PTFE envelope covePTFE has superior properties
  • OVER RING JOINT GASKET   
    Machined from solid metals in a variety of shapes and are designed for high pressure, high temperature or highly corrosive applications by seiecting the most suitable material and shapes.
  • Kevlar fiber braided packing
    Kevlar fiber braided packing is made of Du Pont's Kevlar yarn impregnated with PTFE dispersion and processed with lubricant,brided into square cross section. As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing, they can resist more serve media and higher pressure. It can be installed separately or as end rings wit
  • Carbonized Fiber Packing
    Carbonized fiber packing is a braided packing made of carbonized poly acrylonitrile
    fiber and finished with PTFE dispersion an
  • Expanded graphite molded packing
    Expanded graphite molded packing is press-molded into a ring form of required dimensions. The resiliency and structure of expanded graphite molded packings are not affected by chemical attack, consequently it provides effective seal without any torque loss.
       It can be used to seal hot water, high temperature and pressure steam,
    heat transfer fluid, hydrogen gas, ammonia, orga
 
Page 1 of 1
Go to Page
Cannot find what you're looking for? Post a buying lead.