Home > Product Catalog

Member Since

2007

Jiangyin Lonrace International Trade Co., Ltd

 
  • Scrap Metal Hydraulic Baler
    Name
    YD-630
    YD-1000
    YD-1300A
    YD-1300B
    YD-1300C

    Normal Pressure
    630KN
    1000KN
    1300KN
    1300KN
    1300KN

    Inner diameter of main
  • Scrap Briquetting Press
    This machine is used for cold pressing of other metal scrps including powdery grainy cast iron scrap aluminium scrap, copper scrap and steel scrap etc. to columniform caky block with the density
  • Tyre Cutter (ZQJ)
    This machine could cut the tyre into rubber blocks, and then the blocks are easily crushed by tyre shredder.
     


    Model
    Power
    Kind of tyre
    Force
    Capaicity
  • Magnetic Separator - Tyre Recycling Machine (DCT-500)
    USE:
    Mainly applied for separating the iron materials from the rubbr crumbs.

    Characteristic:
    This machine magnetic separate the materials with screener. The magnetic area is wide, speed
  • Fiber Separator (XFJ-1100)
    XFJ-1100 Fiber Separator
    This machine is the newest design. Excellent machinery of sorting air, is used in separating the fine fluff fiber mixed in rubber powder which is crushed, to improve the
  • Rubber Fine Miller (Tire Recycling Machines)
    CXFJ-28 Rubber Fine Miller
    This machine is widely used in all kinds of nature rubber, synthetic rubber and plastics etc.
    Structure and Principle:
    This machine is composed of crushing mainframe,
  • Magnet Roller Separator (Tyre Recycling Machines)
    This machine could remove the thin steel by magnetic rollers. It can be effectively used for separating small iron powder, and it is good for quality of raw materials and products.
    Technical:
  • Rubber Powder Screener  (JFS-800)
    JFS-800 Rubber powder screener, supporting the use of CQJ-280 rubbing & cutting machine, is used to classify the cruder fiber and rubber granules.
    Technical Data:
    Model: JFS-800
    Capacity:
  • Tyre Wire Drawer
    USE: Separate the crude wire from the used tyre.
    Structure and princle:
    This machine consists of motor, hydraulic system, drawing hook, drawing and main part, etc. Its basic principle is: Driven
  • Tyre Wire Drawer (SG-1200)
    SG-1200 double hooker tyre wire drawer could draw out the steel loop from the waste tyre.
    This machine could draw out the steel loop from the waste tyre.
    Technical Data:
  • Platen Vulcanizing Press
    This machine is used to press the rubber tiles, it is good for use the recycled rubber, easy to operate!
    Main Technical Data: 


    Model
    XLB-D0.63MN
    XLB-D1.0MN

    Total
  • whole tyre crusher(waste tire recycling equipment)
    The machine could crush the whole tyre automatically with two model, one is for 800 tire, another is for 1200 tire.
    This machine has the structure compact, advance technology, low power consumption,
  • Bag making machine
    GBD-500 Flat-bottomed & Vest Bag Maker
    Bag making width: 100-500mm
    Bag making length: 50-1200mm
    Bag making speed: 20-120bags/min
    Bag making thickness: 0.008-0.20mm
    Kinds of bag making: color
  • paper bag making machine
    Introduction: Having absorbed the new technology of Japan, we successfully developed this kind of machine. The feeding materials can be either single printed sheet paper or laminated paper as per
  • rubber fine miller(waste tire/tyre recycling equipment)
    Crushing mainframe, Tornado Traps, whole set of electrical equipement. Mainframe is made up of frame, main motor, variable speed motor, feeding and adjusting device, a couple of active fluted disc and fixed fluted disc.
    Fundamental: Cut and mill the materials, by relative movement between two disc. Adopt wind cooling and water cooling to control the crushing temperature to assure the quality o
  • Calcium Silicate Boards And Cement Boards
    This kinds of boards is manufactured under pressure and temperature-controlled conditions from wood and portland cement.
    It is
  • Fiberglass Ceiling
    It is made from sound absorbing plate of fiberglass wool as basis material on it compound sprayed fiberglass decorative felt. It features good sound absorbing effect, heat presevation, high fire retardant, high strehgth, level, beautiful decorative effect, etc, it is widely used for indoor space where not only has the requirement to drop noise but also the needs medium and high qualtiy decoration,
  • Miller(waste tire/tyre recycling equipment)
    We developed CSJ Miller to solve the front-in process of different kinds of material. The machine is suitable for the coarse comminution of all kinds of rubber, plastics, chemical and pharmaceutical materials.
  • Tyre cutter(waste tire/tyre recycling equipment)
    The unit is consist of frame, rotate mechanism, porp mechanism and knife mechanism.Its principle is that select the tire bead as a prop point and place it on porp mechanism,then adjust it to tightly. Start the machine in low speed by slow down transmission part; knife is set on the machinery panel and it can be forward and back at ones ease.
  • film blowing machine
    Technical parameters:
    Screw Diameter: 45mm
    Screw length proportion: 28:1
    Filut: 10-50kg/h
    Total pom blowing width: 100-600mm
    Film blowing thickness: LDPE 0.015-0.20mm; HDPE 0.008-0.05mm
    Outpwer: 21KW
    Dimension of the machine: 5000*1500*4000mm
    Total weight:3000kg
 
Page 1 of 1
Go to Page
Cannot find what you're looking for? Post a buying lead.