Member Since

2007

xuzhou tongxin wood co.,ltd

 
  • birch plywood (The product uses water resistant, bears the clim)
    Features:
    1) Face and back: birch
    2) Core: poplar, combi core
    3) Size: 1,220 x 2,440mm
    4) Grade: IHPA BB/CC C-grade
    5) Glue: E1, E2, melamine
    6) Thickness: 2.5 - 30mm
  • red oak plywood (The product uses water resistant, bears the clim)
    Detailed Product Description
    Features:
    1) Materials: we take the block board, finger joint board, MDF, particle board
      and the plywood as the basic board
    2) The surface overlaid with good, natural or artificial wood veneer, such as
      red oak, cherry, black walnut, white ash
    2) Made with a special gluing, processing and treatment system
    3) Smooth, flat surface, and straight lines
  • MDF (Lives at home, cabinet decoration)
    Features:
    1) Commodity: melamine particle board, melamine HDF board, melamine MDF board
      (melamine face/back)
    2) Size:
      a) 1,220 x 2,440 x 9/12/16/18/25mm
      b) 1,220 x 2,440 x 2.5/2.75/3/4/5/6/9/12/15/16/17/18/22/25mm (HDF, MDF)
    3) Material: pine, hardwood, or poplar
    4) Color: plain and timber grain (white, blue, teak, beech, maple, oak, walnut, cherry,
      ivory and so on)
    5
  • pine plywood (The product uses water resistant, bears the clim)
    Features:
    1) Pine faced
    2) Poplar core
    3) WBP glue
    4) C+ or C grade
  • brown film faced plywood (This product is thermostable, the high pressure,)
    Detailed Product Description
    Features:
    1) WBP glue, poplar or composition core
    2) Wear, crack and alkaline resistant
    3) Useful in concrete construction, the film faced plywood can smooth concrete
    4) Special waterproof resin can extend the working life of concrete
    5) Exotic brown and black film or local film
    6) Environmentally friendly, lowest formaldehyde
    7) Sizes: 1,220 x 2,440 or 1,250
  • poplar film faced plywood (This product is thermostable, the high pressure,)
    Features:
    1) New technology and materials are being introduced and popularized
      continuously for construction. Our wooden plywood and form work is the
      turnover tool to substitute for steel templet
    2) In construction of field pouring steel concrete, templet is a very important
      turnover tool. The cost of it is 23% of total cost of steel concrete and its
      workload is 28% of th
  • okoume plywood (The product uses water resistant, bears the clim)
    Specifications:
    * 1,220 x 2,440 x 12mm (4' x 8' x 12mm), poplar core, okoume face/back, MR glue,
    BB/CC
    * Moisture: <12%
    * Thickness: can be +-5%
    * Can be used in buildings, and also interior and exterior decoration
    * We can change the core and face/back as requested
  • black film faced plywood (This product is thermostable, the high pressure,)

    Specifications:
    1) Size: 1250 x 2500mm
    2) Thickness: 4, 9, 12, 15, 18, 21mm
    3) Glue: MR, WBP
  • film faced plywood (This product is thermostable, the high pressure,)

    Features:
    1) Made of climate-resistant one grade Dynea WBP glue
    2) Film: imported from Finland and Dynea, weight 125g/m2
    3) Original places: Finland, Indonesia and Malaysia
    4) Anti-abrasive, winkles-resistant and anti-erosive
    5) If put in boiling water for 48 hours, it is still glue-sticking and non-
      deformed
    6) If used abide by the illustrations strictly, it can be reused more than
  • Plywood (The product uses water resistant, bears the clim)
    The product uses water resistant, bears the climate kind of phenolic glue to make, therefore has the wearability, the anti- wrinkle, is anti-corrosive and so on the characteristic. This
 
Page 1 of 1
Go to Page

Related Manufacturers