Selling Leads from Chongqing Richland (Rubber & Plastic) Corp. China

Chongqing Richland (Rubber & Plastic) Corp. > Selling Leads

Member Since

2006

Company Home
Company Profile
Product Catalog
Selling Leads
Contact

Chongqing Richland (Rubber & Plastic) Corp.

Transmission/ Engine Cooling hose and assembly

Voluntary standards: VW TL526 05, working temperature:-30 ～150 ℃,max pressure:1Mpa ; ; AEM for intermediate/exterior layer, AR for intermediate (braided or twist construction), with lead quick
Hose clamp

The material of the clamp is calcium steel and stainless steel. The industrial twist is 5-10Nm, and the max pressure is 1.3Mpa. Our hose clamps are large used all kinds of fields. ; ; We also provide
Low permeation fuel hose and assembly(EIV)

The infiltration for inject hose shall be 15g/m2/day(EIII) required by GM6272M. THV, EFEP, FTPV, FEP series high performance low permeation fuel hose developed by our company, all performance can
High pressure steel wire braided/spiraled rubber hose and assembly

Working temperature from -40 +100, this hose consists of inner tube of oil synthetic rubber, braid/spiral reinforcement, and oil and weather resistant synthetic rubber cover. Application: Hose range
Fuel hose

Low permeation . High medium resistance. Biological fuel adding: Such as ethanol, methanol mixed into gasoline shall be 80%. Lead-free . High temperature resistance ——to be fulfill the requirement of
High pressure nylon resin hose and assembly

This hose is widely used for its high pressure resistance, high temperature resistance, oil and many other chemicals resistance, aging resistance etc. It can be used in car industry, engineering,
Air hose

Our air hose is widely used in all kinds of fields. The inside layer is excellently air-tight and the outside layer is superior in anti-aging and wear-resistance. ; ; ; ; ; ; ; ; We also provide the
Multiply layer fuel hose and assembly(EIV)

1.Low permeation for various kind of material ; 2.Low extractability and no extract residue ; 3.Chemical resistance for various kind of material 4.Excellent heating resistance ; 5.Excellent low
Hydraulic hose and assembly

High pressure: the burst pressure shall be higher than 49Mpa(ID 3.2mm). Lower swelling: SAE J1401 require volume swelling shall be less than 1.08cc/m at 6.9Mpa. ; ; We also provide the following
Nylon resin hose and assembly

This hose is widely used for its high pressure resistance, high temperature resistance, oil and many other chemicals resistance, aging resistance etc. It can be used in car industry, engineering,

Page 1 of 1

Go to Page

Related Manufacturers