Selling Leads from Xetra Electric Co.,Ltd China China

Xetra Electric Co.,Ltd China > Selling Leads

Member Since

2007

Company Home
Company Profile
Product Catalog
Selling Leads: Circuit Breaker [1]; Transformer [2]; AC CONTACTOR [1]; Surge Protective Devices [1]
Contact

Xetra Electric Co.,Ltd China

H.R.C FUSE

Low Volt. H.R.C Fuse
Code - FB26D
Technical Standard:IEC60269

Fuse Protection:against overload or short circuit in Power System.
Rated Insulation Volt: up to 550V
Rated Heating Current: 32A, 63A
Pole: 1Pole, 2Pole, 3Pole
Fuse link Type: D02
Fuse Holder Type: RL8
Heigh (With handle) : 92mm
Total Length: 93mm
Installation: DIN Rail Type
H.R.C FUSE

Low Volt. H.R.C Fuse
Code - FB26D
Technical Standard:IEC60269

Fuse Protection:against overload or short circuit in Power System.
Rated Insulation Volt: up to 550V
Rated Heating Current: 32A, 63A
Pole: 1Pole, 2Pole, 3Pole
Fuse link Type: D02
Fuse Holder Type: RL8
Heigh (With handle) : 92mm
Total Length: 93mm
Installation: DIN Rail Type
Current Transformer

Material: Epoxy Cast Resin
Rated insulation level:12/42/75kV
The power factor of burden:0.8(lag)
Rated secondary current:5A/1A;
Standard of secondary class filthy
Performance conforms wite IEC standard and GB1208-97"Current Tansformer"
Meter rage class safeguard sytem:Fs<11
AC CONTACTOR

CJX1(3TB 3TF)series AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to 1000V,rated operation current 9~475A under AC-3 duty.It is mainly used for making/breaking electric circuits at a long distance & for frequent starting/stopping & with thermal relay to compose a magnetic motor starter,so.The products acoords with such standards as IEC60947-4-1 & GB14048.4.
Cast Resin Potential Transformer

Material: Epoxy Cast Resin
Rated Insulation Voltage: 11KV
Rated insulation level:12/42/75kV
Rated secondary Volt:110V
surface creepage distance: class II
Products accordance with: GB1207-1997 "Voltage transformer"
Power factor of load:COS@=0.8 (lagging)
Equipping with fuse: XRNPG-12/0.5A
Cast Resin Potential Transformer

Material: Epoxy Cast Resin
Rated Insulation Voltage: 11KV
Rated insulation level:12/42/75kV
Rated secondary Volt:110V
surface creepage distance: class II
Products accordance with: GB1207-1997 "Voltage transformer"
Power factor of load:COS@=0.8 (lagging)
Equipping with fuse: XRNPG-12/0.5A
AC CONTACTOR

CJX1(3TB 3TF)series AC contactors are suitable for frequency 50/60Hz,rated insulation voltage up to 1000V,rated operation current 9~475A under AC-3 duty.It is mainly used for making/breaking electric circuits at a long distance & for frequent starting/stopping & with thermal relay to compose a magnetic motor starter,so.The products acoords with such standards as IEC60947-4-1 & GB14048.4.
Moulded Case Circuit Breaker

The XEM1 Series molded case circuit breaker are similar as ABB Tmax type
Series which you referenced.
XEM1 series molded case circuit breaker is suitable for circuit of AC 50Hz/60Hz with rated voltage up to AC 690V
and rated operating current to 630A. It features normal structure, reliable performance, complete accessories
and high breaking capacity, used for power distribution and protecti
Mini Circuit Breaker

Features: Cut off phase wire and neutral wire at once and one time.
AC:240V/ 50/60HZ
Pole: 1Pole+N
For overload and short circuit protection
Standard:conforms to IEC60898
Rated current: 6, 10, 16, 20, 25, 32A
No. Of Pole: 1P+N
Breaking capacity: 3000A
Mechanical life: 20000
Residual Current Circuit Breaker

AC:240(220V)/415V(380V) 50/60HZ
Pole: 2Pole, 4Pole
Rated Current(In):
6/10/16/25/32/40/50/63A
Rated residual operating current:
( Irn) 30/50/75/100/300mA
Rated residual non-operation Current:
( Irno) 0.5Irn (Below)
Residual operating current scope: 0.5Irn~Irn
Residual current off-time: <0.1s
Ultimate short-circuit breaking capacity: (Inc) 6000A
Endurance Times (More Over): 4000

Page 1 of 2

Go to Page

Related Manufacturers