Home > Product Catalog

Member Since

2008

Zhejiang Tea Group Co., LTD

 
  • ABRASIVE SPONGE BLOCK
    Name:abrasives sponge block

    Type:ABRH-018
     
    Mode:Materials:
    aluminium oxide or silicon carbide
    resin over resin
    sponge

    applications:
    it is flexible and soft ,
  • Abrasive Fiber Disc
    material: aluminum oxide or silicon carbide
    outer diameter: 100,115,125,150,180
    hole diameter: 16,22,40

    grit : 24#-400#
  • ABRASIVE FLAP WHEEL
    Designed to deliver a consistent finish with a uniform rate of cut, flap wheels wear away, continually exposing fresh abrasive. Conformable to most shapes, they are available in coarse to fine grit.
  • ABRASIVE CLOTH ROLL
    Name:Aluminum Oxide
    Code:RH JB-5
    Name:Silicon Carbide
    Code:RH 93YX
    Name:Silicon Carbide
    Code:RH GXC51
    Name:Aluminum Oxide
    Code:RH 35JF
    Name:Aluminum Oxide
    Code:RH GXK51
    IN SHEET :
  • ABRASIVE TURBO FIBER DISC
    a kind of lamella abrasive , which is formed by bonding the abrasive on the vulcanized fiber disc backing with resin adhesive.

    size on following :
    4"x5/8"
    4.5"x7/8"
    5"x7/8"
  • Abrasive Wire Brush
    Application includes removal of burrs, rusts, paints etc. Shown below is a list of standard models and numbers. SIZE : 50x6x30 63x6x30 75x6x30 fill type: AS0.55/320 AS0.90/180 AS1.00/120
  • Brown Fused Alumina
    Brown Fused Alumina Purpose Specification Chemical composition(%) Magnetic material content(%) Al2O3 Fe2O3 SiO2 TiO2 For abrasive F 4# 0# 95.0 Min 0.3 Max 1.5 Max 3.0 Max 0.05 Max 90# 50# 94.0 Min
  • TCT CUTTING SAW
    Application: For cutting aluminum alloy, plastic steel and other non-ferrous metals, which the thickness up to 3mm.
    We produce following size:
    Out
    diameter Center
    hole Teeth
    Width/
    Board
  • DIAMOND SAW BLADE
    Brazing is a commonly used technology in producing diamond discs , the segment is bonded tightly to the steel base by brazing under high-frequency electrical current . it features fine quality and
  • Diamond Saw Blade
    Brazing is a commonly used technology in producing diamond discs , the segment is bonded tightly to the steel base by brazing under high-frequency electrical current . it features fine quality and
 
Page 1 of 1
Go to Page
Cannot find what you're looking for? Post a buying lead.