folding scooter TJ-1063 (TJ-1063)
Detailed Product Description
Detailed descriptions :
1.PU flash broad-board of three-wheels ;
2.folding design : scooters have a folding mechanism at the bottom of the
handlebar assembly which usually includes a quick-release lever allowing
you to collapse the handlebars before you fold the scooter;
3.wheels: its wheels come with an ABEC high-grade bearing which can
make you slide smoother and faster .
At the same time, larger wheels than in-line skate's will clear cracks and
bumps in pavement more easily ,but are not well suited to doing tricks;
4.pedals: the pedal is the part of the scooter that you stand on ,are made of
light weight aluminum or steel usually. It typically comes with grip tape
for better traction, and some ones include a urethane cushion between the
pedal and the frame to absorb shocks and make your ride smoother;
5.handlebars: can be adjusted easily to certain length from 22inch to 36
inches or so, T-style handlebar that turns to let you steer the scooter
which have two foam-covered grips extending from either side of the
center stem , meanwhile ball style handlebars replace the "T'' at the top
of the handlebar stem with a simple rubber ball-grip which helps you
balance while you ride the scooter surfboard-style ,leaning side-to-side to
turn ;
6.brakes: while most common brake is a simple fender brake , handbrakes
is applied to mount on a hinged spring which use a caliper mounted on
wheel that you operate with a hand lever ,just as on a bike, when you
squeeze the lever the brake pads pinch the wheel and stop the scooter.
|