Magnetic Door Lock (XL002)
Detailed Product Description
※Function
Operating by electricity or key or hand
High security
※Application
Fit for all sorts of door leaf or access control system
▲ Electric performance
Normal voltage: 9-12VDC/AC
Work current: 1.5-3A
Consumption power: 10W
Electricity status: discontinuously supply current, power supply no more than 8 seconds
Operation time: 0.5 seconds at 12V
Current draw: 0.27A at 12VDC
Life warranty: one year or 120000 times operation
Pressure in normal: 10000N
Temp. range: -40℃~+50℃
Regulated and filtered voltage: DC500V(one minute)
▲How to install
Using the relevant screws to install lockbody, cylinder and padlock in the doorframe.. The clearance is 5mm faraway from lockbody to padlock.
If you use door closer to form completely set, you should adjust the hexagonal nut by spanner or pliers on the door closer so that the loading spring works normally, so they are balance between the door and the door closer.
The door will lock or unlock automatically in one second after the electric circuit sets up, on condition that the voltage is DC9-12; the power is 10W; the current is 1.5-3A
▲Cautions
When the lock will be supplied power, you must remember that it works normally within 8 seconds.
When not lubricating in the cylinder core, you can put some pencil powder (not lubrication oil).
Some technology data
|