Protection Tape

Detailed Product Description

Protection Tape, Protection Tapes, Protect Tape System Description:

The Outer Tape T-200 series is cold applied Protection Tape coating systems for Protection of the pipe and its T-100 Series surface from damages. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:

Heavy duty adhesive.
Conformable to irregular shapes.
No release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems

T-200 Outer Tape (Protection Tape, Protection Tapes, Protect Tape) series Coating Systems with AWWA C-214 Standard:

Type of Protection Tape:		T-240		T-250		T-265		T-280		T-2100		T-2130
Thickness: (ASTM D 1000)	Total	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil
		0.38	15	0.51	20	0.64	25	0.76	30	1.02	40	1.27	50
	Film	0.28	11	0.38	15	0.51	20	0.63	25	0.64	25	0.76	30
	Adhesive	0.10	4	0.13	5	0.13	5	0.13	5	0.38	15	0.51	20
Tensile:		29 lbs/in		39 lbs/in		39 lbs/in		53 lbs/in		66 lbs/in		78 lbs/in
Length:		60 Meter		50 Meter		40 Meter		30 Meter		25 Meter		20 Meter
Width:		2, 3, 4, 6, 9,12
Colour:		Black, White, Red, Blue, Purple, etc.
Elongation:		300%
Adhesion to Inner Layer T-100 (ASTM D 1000)		46 oz/in, 5N/10mm
Cathodic Disbandment: (ASTM G8)		0.25 in radius 6.4 mm
Water Vapor Transmission Rate: (ASTM F1249)		0.2g/100in² /24h, 0.3mg/cm²/24h
Water Absorption: (ASTM D570)		≤ 0.1
Volume Resistively: (ASTM E257)		2.5 X 10¹² ohm·cm
Dielectric Strength: (ASTM D 149)		40 KV
Temperature Range: (Normal in Ground Service)		-30 to 160 ^oF, -34 to 71^oC