Scaffold clamps

Detailed Product Description

Right angle coupler
a coupler used for connecting two tubes crossing at a right angle.
Class A and class B right angle couplers have the same requirements, except that class B couplers have a higher load capacity, and a minimum requirement for torsional rigidity.
Swivel coupler
a coupler used for connecting two tubes crossing at any angle.
Parallel coupler
A coupler used for connecting two parallel tubes
Sleeve coupler
A coupler used for jointing two tubes located co-axially and whose purpose is to transmit tensile and compressive and bending forces.
Class A and class B sleeve couplers have the same requirements except that class B couplers have a minimum requirement for strength in bending and a higher tensile strength requirement. There are two basic types of sleeve couplers: Sleeve coupler functioning by friction, and Sleeve couplers working with shear pins
Putlog coupler
A coupler used for fixing a putlog or transom to a ledger.
Loose spigot
An internal component used for aligning tubes co-axially and able to transmit compressive forces.