special silicone products for pad printing
Special silicone rubber for pad printing
Model: 918#
Appearance: yellow, red, green, white
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength (kgf/cm): ≥35
Elongation break(%):≥500
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 928#
Appearance: translucent
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥20
Elongation break(%):≥410
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 966#
Appearance: white
Viscosity(cs): 15000-18000
Hardness(A): 24
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥20
Elongation break(%):≥410
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 900#
Appearance: yellow
Viscosity (cs): 18000
Hardness (A): 25
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf /cm):≥20
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
Model: 911#
Appearance: yellow, red, green, white
Viscosity(cs): 15000-18000
Hardness(A): 25
Tensile strength(kgf/cm2 ) ≥35
Tear strength (kgf/cm):≥19
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 912#
Appearance: red, green
Viscosity(cs): 15000-18000
Hardness(A): 28-30
Tensile strength (kgf/cm):≥33
Elongation break(%):≥400
Retractility (%):≤0.3
Curing agent mixed rate(%):2-3
Operate time(min): 30
Curing time(hours): 2-4
Model: 2018#
Appearance: white
Viscosity (cs): 12000-15000
Hardness (A): 23-26
Tensile strength (kgf /cm):≥25
Elongation break(%):≥350
Retractility (%):≤0.3
Curing agent mixed rate (%):2-3
Operate time (min): 30
Curing time (hours): 2-4
All the datasheet just for reference,for the usage please have a look at our websit:en.szrl.net