Dry Charged MF Sealed Lead Acid Battery

Characteristic

◎Adopting super pure lead-calcium plate and treating with the technology of plate charged. After adding acid, place it under the normal temperature for 5 minutes. Then the battery can work without recharging.
◎Adopting the heat sealing technology of Japanese bridge welding and the container made of imported polypropylene plastic, which make the battery endure the  vibration strongly.
◎The storage life of dry charged battery achieves one year or so, which overcomes the disadvantage of the battery with acid that can't stock for a long time.
◎Adopting the heat sealing technology of IEC international standard, which make the battery air-tight and used safely without worrying about  the acid  leakage.

Handling Instruction

(1)Charging
◎Follow the specified methods shown on the battery case for charging;
◎Avoid parallel charging, which could shorten battery life. If such charging is unavoidable, make two for maximum;
◎During charging and any other occasions, never put the battery in a sealed container or plastics bag without outlet.
(2)Discharging
The battery must be immediately charged when it has been over discharged.
(3)Operation
◎Do not use in the atmosphere of organic solvent. Do not wash the battery with organic solvents.
◎Do not install the battery in a location close to any object which gives off heat (such as a transformer) or fire.
(4)Other items for caution
◎Ambient temperature for storage must be within the range of -20OC(-4F)~40OC(10 4F);
◎During storage, recharge the battery at least every six months;
◎Do not short circuit the battery;
◎In case sulfuric acid from the battery happens to come in contact with your skin or clothes, immediately wash with water. If it comes in contact with your eyes, wash them with water and immediately consult a doctor for medical care. 

• Flooded Series-Type of Standard (6N2A-2C)
• Battery
• Motorcycle Batteries
• Motorcycle Batteries