Silica Sol Shell

TR brand Silica Sol Shell use the "single-quality silicon-step solution" Sol production , which use single silicon as raw materials, catalysts (such as sodium hydroxide) under a direct response to deionized water to get the necessary products. It is the hydrosol of silicon dioxide. Its basic ingredients are water, the amorphous silicon dioxide and sodium oxide stabilizer, it is a inorganic water-based adhesive. Its appearance was milky white or translucent TANSEI-Sol. The product is with non-toxic, tasteless, non-corrosive, non-flammable and no-explosive performance.

 

Features:

1, Fine particles (10 ~ 20μm), has a large surface area, particle itself colorless and transparent, without influence to the true color of the covered objects.

2, Have a good adhesion. Joining Sol to some kind of fiber or granular material, when the Sol water evaporated and dry-curing, the colloidal particles firmly attached to the surface, formation of silica between the particles, and generate a hard gel structure. It is a good adhesive.

3, With great absorption, can produce adsorption to organic and inorganic.

4, with strong temperature endurance and generally have tolerant about 1600 ℃.

5, Good hydrophilic. Can be diluted to any concentration by distilled water, with the stability increased with the enhancing of the dilution.

6, Sol also with a high degree of "decentralization", low viscosity, the penetration character the same as water, so when mixed with other substances it’s dispersed and permeability are very good. And have a very good "resistance" and many other advantages after dried it

 

Product application:

1, Used as adhesive for a variety refractory material, with a strong bonding ability, high temperature-resistance (1500 ~ 1600 ℃) and so on. Use the fire-resistant silicate fibers Sol as the main raw material, because of their excellent energy-saving and high-temperature resistance, it be widely used as excellent insulation material for industrial furnace with heat and so on, Sol used as binders and other monolithic refractories, not because of their low melting point into all kinds of oxides, a product of enhancing the useful performance, but also Good performance advantages of release products with high-intensity, the volume of high-temperature stability, high temperature thermal shock resistance and so on. In addition the acid-resistance cement or ceramics treated with sol, can prevent the infiltration of acid and can bear high pressure, can be used for creat the acid-resistant chemical equipment.