Traffice Surveillance Cameras (HS-C26H)

Model: HS-C26H/C27H/C28H Traffice Surveillance CCD Cameras

●FEATURES:
● Exview HAD technology,higher sensitivity,lower smear levels 

● Selectable White Balance Model
● Selectable Shutter Speed                          

● Advanced Backlight Compemsation function
● High quality picture                           

● Used for closed surveillance with high durability
●OVERVIEW:
 Noun explanation:
AI: Auto IRIS                             BLC: Back Light Control
ATW: Auto Trace White                      MWB: Manual White Balance
AWB: Auto White Balance                    LL: Line Lock
AES: Auto Electric Shutter                    AGC: Auto Gain Control
IRE: Level of video signal

● PRECAUTION
In case of problem
Do not use the camera if fume, smoke or a strange odor emitted from the unit, or if it seems not functioning correctly. Disconnect the power cord immediately, and consult your dealer.
Do not open or modify
Do not adjust or modify the camera’s internal circuits or power supply modules, as it may be dangerous and cause damage to the unit.. For internal settings and repairings, consult your dealer.
Do not put Objects inside the unit
Make sure that no metal objects or flammable substance get inside the camera that may cause damage to the unit. If water or a liquid get inside the camera, disconnect the power cable immediately, and consult your dealer. Be careful to protect  the camera from direct exposure to weather, rain, etc.
Be careful when handling the unit
Do not drop the camera or subject it to strong shock or vibration
Install away from electric or magnetic fields
It may interfere with or distort the image when install close to an electric or magnetic fields. Ex: TV, Speaker, etc.
Away from humidity, dust and high temperatures
Do not install it where there is greasy smoke or steam, where the moisture may get too high, or where there is a lot of dust...Do not install close to stoves, or other heat generating devices, such as spotlights, etc….
Avoid places where there is direct sunlight.
Cleaning
Do not directly touch the CCD element. If necessary, use a soft cloth moistened with alcohol to wipe off the dust.
INSTALLATION
●MOUNTING THE LENS
C/CS MOUNT LENS TYPE
1. Remove the protective cap from the camera's lens mount
2. Install the C-mount adapter on the camera lens mount if use C-mount lens. 
3. Carefully align the CS/C Manual lens into the camera lens mount and turn clockwise slowly until it is firmly attached.
4. Insert the cable Plug into the lens terminal socket located behind of the camera body. IRIS connector define
 see following fig.
IRIS JACK Video LENS DC-LENS
P1 +12V DUMP-
P2 N.C. DUMP+
P3 VIDEO DRIVE+
P4 GND DRIVE-

5． Set the IRIS switch to DC position if use DC driver IRIS lens. Set the IRIS switch to Video position if use Video driver IRIS lens.
POWER SUPPLY
1. Before turning on the power to the camera, ensure that the lens is fitted onto the camera to avoid damage to the exposed CCD chipset.
2.regulated power to camera is necessary, otherwise damage maybe caused to the camera
3.Please pay attention to pole of power when use DC power to terminal input, otherwise camera will be burn down.
CONNECTION
1.Connect video output and Audio output to the Video /Audio input of monitor or VCR.
2.Connect power to power input then turn on the power.
3.Adjust the lens and camera’s setting to get the best
Model Number:   HS-C27H
Type　             Colour
Signal System    NTSC/PAL
Pick Up Device    1/2" Exview-HAD CCD
Picture Elements    762(H)X582(V)
Mini Illumination    0.01Lux/F0.8
Vertical Frequency    NTSC:60Hz     PAL:50Hz
Horizontal Resolution    535TVLines
Scanning System    2:1 Interlace
Sync System    Line Lock or Internal
S/N Ratio    more than 52dB
Electronic Shutter    AES: NTSC1/60-1/10,000SEC   PAL1/50-1/10,000SEC                   
White Balance    ATW: auto trace white Balance
Black light compensation    ON or OFF
Gain Control    AUTO
GAMMA    0.45
Vertical Phase    0-180 adjustable
Lens driver    DC or Video
Power supply    DC12V or AC24V   (±20%)
Power Consumption    200mA/3W
Dimension  L x W x H(mm)    110 x 69 x 55
Weight    619g（With Packing）
Storage Temperature    -30～+60℃
Operating Temperature    -10～+50℃
HS-C26H: SONY1/3"Super-HAD CCD  10BitADC  535TVL
0.08Lux  DC12V/AC24V
HS-C28H: SONY1/3"Exview-HAD CCD  10BitADC 
535TVL  0.015Lux  DC12V/AC24V