Exterior Siren With Strobe / Piezo siren with strobe EAS-2011

The EAS-2011 is a high quality outdoor siren combining loud acoustic siren output and a flashing light. SPECIFICATIONS Piezo siren & strobe for outdoor Operating Voltage: 9-15VDC Rating Voltage: 12VDC Flash Rate: 80 10% per min Strobe Current: 100mA Max. Freq. Range: 2.6KHz 30% Sound Current: 260mA Max. Min. S.P.L.: 105dB/m@12VDC Material: ABS INSTALLATION Remove plastic cover by removing one screws (plastic caps) with a screwdriver. Connect the wires from control panel to the siren (see examples of connections on the back side). Wiring Connection: Tamper switch: N.C. Tamper; open when tampered Optional: 12VDC for LED Siren Tamper LED Strobe + - + 12V - + - Note! Do not forget to switch the control panel to the control to the service mode before wiring the siren! For maximum siren output use cables with sufficient cross section of wires.

Model No:

EAS-2011