-
Steam Solenoid Valves ZCL
Operating type Normally Closed 2/2 way Direct operating Parameter↓Model→ ZCL-1 ZCL-2 Medium Model 1 Water, diesel oil, gasoline, coal oil, air, etc. Model 2 Steam, hot water, hot oil, hot air, etc. 
-
Solenoid Valve for Gas, Air, Steam (ZCQ-20B-9)
Solenoid Valve for gas ,air, steam2/2 way normal close, direct action, design for use with steam, water and air in general. Port Size: Female G 1/8" Inner orifice: 1.8 mm; 2.2mm; 2.7mm; Body
-
steam iron solenoid valve(ZCQ-01B)
2/2 way, NC, direct action, with flow adjust screw, design for use with steam, water and air in general.
Port Size: Female G 1/4"
Inner orifice: 2.0mm and more...
Body material: Brass
Seal ring...
-
Steam Solenoid Valve (ZCQ-20B-99)
2/2 way normal close and valve body are forged for brass. This valve include current adjust switch could be widely used in gas,
-
Steam Iron Solenoid Valve (ZCQ-20B-5)
2/2 way, NC, direct action, design for use with steam, water and air in general. Port Size: In put: Male G1/8" Out put: tube connector 6.3mm Inner orifice: 1.8 mm, 2.2mm, Body material: Brass
-
Jacket Gate Valve
Steam jacket gate valve,gate valve, Jacket gate valve
main parts material parts name
ZG1Cr18Ni9Ti series
ZG00Cr18
-
FT44 ball float steam trap
Pressure Rating ： 1.6- 4.0Mpa Specification ： DN25Material ：cast steel Standard flanges ：DIN、ANSI、JIS、JB79 1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single
-
Ball Float Steam Trap (FT14)
1. The valve adopts two kinds of sealing, e, g, balance double valve seat and single valve seat with reliable closedown and long life. 2. There's always condensate water available in front of the
-
Ball Float Steam Trap (FT14)
1.The valve adopts two kinds of sealing,e,g,balance double valve seat and single valve seat with reliable closedown and long life.
2.There's always condensate water available in front of the valve
-
TD42F thermodynamic steam trap
Pressure Rating ： 1.6- 6.4Mpa Specification ： DN15-50Material ：cast steel Standard flanges ：DIN、ANSI、JIS、JB791.Attached with steam or air heat preservation mechanism and unaffected by the
-
-
Steam Pressure-Reducing Valve
Y43H steam pressure-reducing valve Application and main charactersThis series of pilot piston-type pressure reducing, is consist of main valve and pilot valve. Main valve is composed of seat, main
-
steam trap
Product Description
Steam Traps
Standard compliance:
1) Design and manufacture: manufacturer’s standard
2) Test and inspection:
-
Free Float Steam Trap (CS41H)
Pressure Rating : 1. 6-4. 0MPa
Specification : DN15-200
Material : WCB. F304. F316
Executive Standard : JB/T9093-1999 Medium: oil, gas, waterFree Float Steam Trap(steam valve, solenoid steam
-
thermal power type steam trap
1.Attached with steam or air heat preservation mechanism and uneffected by the environmental hunidity ;with operation frequency decreased and service life prolonged .
2.Provided with filter screen and...
-
free semi ball float type steam trap
Structural characteristics and working principle:When the drain valve does not start, free semi ball float settles over the transmitting tube. When the drain valve is in the drainage state, the steam...
-
lever ball float type steam trap
1.The valve adopts two kinds of sealing ,e.g.balance double valve seat and single valve seat with reliable closedown and long life .
2.There is always condensate water available in front of the valve...
-
BELLOW TYPE STEAM TRAP
Structural characteristics:
1. Metal bellow elastic cells can be self-adjusted between 65 and 110,also can be manually adjusted under discharge temperature.
2. It can exhaust automatically without air...
-
Exhaust Steam Valve
TRANSPARENT-LIKE-AUTOMATIC EXHAUST STEAM VALVE
Uses the characteristics of:
1. Mainly used for central air-conditioning, hot-
-
solenoid valve
two-position two way direct drive type solenoid valvejoint pipe bore:3/8",1/2",3/8",1-1/4",1"1-1/2",2"
-
Solenoid Valve for Steam Irons
Features:
1) Media: steam
2) Normal close
3) Working pressure: 0 - 5bar
4) Voltage: AC 220V
5) Valve body material: brass