Electroplate Diamond Wire(SawBF-SJ1)
Electroplate diamond wire/beads are made from an annular steel support onto which the diamond grains are electrolytically deposited. They can be used to exploitation marble & granite quarries and with following specialties:
1. To be able to used for great area marble & granite quarries cutting
2.High material shaping rate and low resource waste
3.High yield efficiency
4. Easy manipulation, safe, low-noise, no-dust
5.Low integrate cost
They have many advantage:
1. They are remarkably robust and sharp. They are perfectly suitable for sawing marble. It is also used when the customer wants a high cutting speed, as it is noted for its super-high cutting & grinding speed.
2. They are especially appreciated for demolish ore.
3. Compared to the sintered wire, the electrolytic wire only need 25HP and reduced water spraying.
Our main products are as follows:
1. Electro-plated diamond tools:
1) diamond blades/saws
2) diamond grinding wheels,
3) diamond polishing pads
4) diamond mounted points/burr sets
5) diamond files
6) diamond core drills
7)diamond sharpeners
8)diamond cutting discs(segmented/ continuous rim/ turbo cutting discs)
9)diamond wire
10)diamond dresser
2. Sintered diamond cutting blades, saws
3. Resin-bonded diamond blades
4. welded diamond blades
5. CBN tools
6. abrasive
7.diamond dental tools
They can be used in stone & construction industries, such as granite, marble, sandstone, limestone, gritstone, slate, asphalt, concrete, ceramic, glass, precious stone, ect.