Find China and global products, suppliers and manufacturers.
Diamond
3rd year
Home > Selling Leads > tractor > JM454 Tractor (JM454)

Hubei Machinery & Equipment International Limited

City : Wuhan

Province/State : Hubei

Country/Region : China

Telephone: 86-027-87426322

 

View Contact Details

JM454 Tractor (JM454)

Detailed Product Description

Features:
Air cleaner: under hood
Cylinder: Alloy cast iron
Cylinder head: HT250 alloy cast iron with copper and chromium
Crankshaft: QT800-3 modular cast iron
Crankshaft drive: by crankshaft through bevel wheel at blower end
Crankshaft case: HT250 grey cast iron
Pistons: ZL109 aluminum alloy
Injection pump: right spiral
Governor: mechanical centrifugal
Cooling system: forced water cooling
Lubrication: oil pressure and splash lubrication


Overall Dimension Diagram:
A. Wheel base: 1300 mm / front , 1300-1600mm / rear
B. Overall length: 3825 mm
C. Overall width (min.): 1625 mm
D. Height over exhaust: 2065 mm
E. Height over safety frame: 2507 mm

Engine Full Load Performance:
Model: SL3105ABT
Type: 3-cylinder vertical, water cooled, 4-stroke, nozzle combustion chamber
Bore/Stroke: 105/117 mm
Displacement: 3.039L
Compression: 17:1
Rotations: Counterclockwise (view toward flywheel)


Power Take-Off:
Type: semi-independent dual speed (either two of 540 r/min, 720 r/min, 1000r/min)
Configuration: 35mm/6 spline, 38mm/8 spline
Speed/@engine rpm: PTO 540/1994 rpm, PTO 1000/2050 rpm


Steering/Brakes:
Steering type: hydraulic
Service brakes: disc type


Fluid Capacities (filling):
Fuel: 47L
Engine oil sump: 10.5L
Front drive axle: 7L
Cooling water: 12.5L


Electrical:
Alternator: JFB1, 350W, 14V
Starter: QD142, 2.5KW, 12V
Battery: 3-Q(A)  150, 12V
Lights: 2 head light, 2 signal light, 1 tail lamp


Clutch:
Type: dual stage, gear operation
Size: 10"


Transmission
Type: 4 x (2+1) x 2 compound type
Fwd/Rev. speed: 16F/4R
Gears: 2 x 2 (
Ranges: 4
Options: Yes
Synchronization: optional
Speed range: 0.321-30.203 km/hr / 0.476-9.979 km/hr


Performance:
Maximum PTO horse power measure at 2350 rpm: 40.5 HP


Hydraulics:
Type: closed center
Flow/Pressure: 16MPA
Type of pump: CBN-E314 gear pump
Max. flow at remove valves: 18dm3
Number of remove valves: 1
Type of remove valves: safety valve


3-Point:
Category: 2
Aux. lift cyl: std.
Lift cap @ hitch pt: 7500N (at 610mm behind lift point)
Controls: position


Chassis Data:
Pendulum angle of front axle: 12 degrees
Tires: front wheel 8.50-20, rear wheel 12.4-28
Tire inflation pr
Post Date:5/20/2008
Expiry Date:8/18/2008

Cannot find what you're looking for? Post a buying lead.

Send Message