Main Function Introduction:
1.The entire machine's operation uses the man-machine contact surface: Operates direct-viewing and convenient, the running status is dynamic demonstration, the frequency conversion velocity modulation, the maximum speed may amount to 45 meters/Minute (basis user demand, but also may suitably raise the speed).
2.High production efficiency: The big glass piece can move at the full speed, the small glass piece is possible have an ad hoc storage area, and stay at the storage area temporarily, also the clean glass may input continuously.
3.Conserves energy interrupted type automatic operation system:Entire machine uses the energy conservation interrupted type automatic operation system, when glass movement to the electro_optical sensor of the end of the input section, the brush, the water pump, the air blower will be start automatically, when the production is interrupted, the brush, the water pump, the air blower will automatically stop, the section of the equipment which were occupied moves in full speed, other parts which do not work is at the intelligence dormant state, so the economical energy conservation can be keeped.
4.LOW-E glass automatic diagnosis system:The coating glass (especially the LOW-E glass) the membrane is not destroyed, the glass transportation section is loaded with the coating glass automatic diagnosis system, fully guaranteed the correct clean of the coating glass and the Slice Joint.
5.The main low-voltage electric appliance part (frequency changer, PLC, vacuum system, touches screen and so on), transmits motor, uses the import brand completely. (For details sees fitting detailed list of specifications)
6.The entire strip line has the ultra strong function, can produce normal, the heterogeneous type, the ultra long and the curtain wall glass and the LOW-E glass.
7.All movements of the entire line are equipped with the manual function, and is equipped with manually backs up function, it is advantageous for the entire machine overhaul and the manual operation Slice Joint. The back support roller to use the partly inserts type.
8.The transportation section is equipped with the rack which used for laying the glass temporarily, facilitates place the big glass lites
9.Uses the lubrication co
| Post Date: | 5/20/2008 |
| Expiry Date: | 8/18/2008 |