6-in-one Digital Numberic Heat Transfer

Fix it with the tile upward on the silica gel.
Press the handle and adjust the pressure according to the instruction above.
Mug:
Parameters: Metal board: the starting temperature is 230 degree. The highest temperature is 330 degree. The heating time is 40 seconds.
Transferring: Put the mug into the mould.
Press the handle and adjust the pressure according to the instruction above.
Textile:
Parameters: the starting temperature is 355 degree. The highest temperature is 355 degree. Use the sublimation paper 30-50 seconds for the pure chemical fibers. Use T-shirt transfer paper 10-20 seconds for the pure cotton clothes)
Transferring: clean the surface of the tile, and stick the transfer paper to the upside surface. Fix it with the tile upward on the silica gel.
Press the handle and adjust the pressure according to the instruction above
Plate:
Parameters: the starting temperature is 230 degree. The highest temperature is 330 degree. Use the sublimation paper 30-50 seconds for the pure chemical fibers. Use T-shirt transfer paper 10-20 seconds for the pure cotton clothes)
Transferring: clean the surface of the tile, and stick the transfer paper to the upside surface. Fix it with the tile upward on the silica gel.
Press the handle and adjust the pressure according to the instruction above
Use the slow-transferring and turn off the machine each time the temperature rises 30 to 40 degree and turn it on 10 seconds later. By doing this, the percent of deformation plate can be reduced.