DSP powered mixer DSA1220

FEATURES Ultra low-noise ULN desing, highest posssible headreoom,ultra-tranparent audio; Ultra-wide 60db gain range; Lowest possible distortion 0.0007%(20HZ-20KHZ); Intergrated 24 bit digital stereo DSP processor with 32 Preset including reverb,delay,chorus,tube distortion,channel for esay to use along applications; 7 band stereo graphic EQ allow precise frequency correction of monitor or mian mixer; 2 fully equipped sero input channels,3 band EQ AND MID Frequency control; Inserts on each MONO channel for flexible connection of outboard equipment high-headroon line input; 3 Aux send per channel:1 pre/post fader for monitoring,1 post fader for external send,1 post fader for DSP processor; Clip indication and gain level set LED plus mute switches for each channel allow fast and accurte level setting; Two sub buses and output direct or mix to main buses; 2 multi-functional setero aux returns; Balanced main mix output with gold-plated XLR Connectors,headphone/control room output and stereo tape outputs; Extremely rugged steel construction ensures long life even under most demanding conitions; Switchable +48V phantom power for condenser microphone; Long-wearing 60 mm logarithmic-taper faders and sealed rotary controls; Response plus lowest possible power sonsumption for energy saving; Rack mount brackets included; Dimension: 45.00X40.00X23.00CM; G.W.:18.50KGS. SPECIFICATION Mono Input Channels Balance MIC or Line Input Stereo Input Channels Balance or Unbalance Stereo Lline Input Frequency Response 10Hz~30KHz +/-3db 20Hz~20KHz +/-0.5db MIC Sensitivity (22Hz-22KHz) -129.5db, 150 Ohm Source; -132db, Input Short Circuit Gain Adjustable Range +10db~+60db Line Input Range -40db~+10db SNR more than or equal to 113db THD less than or equal to 0.01%(+4db, 1KHz) EQ HF:12KHz+/-15db MF:5KHz+/-15db LF:80Hz+/-15db Max Input +22db Max Output +22db Balance, +16db Unbalance Effector 24-bit DSP, Multi-effect Processor, 48KHz Sampling Frequency, 32Effect Modes Memory, LCD Display Phantom Power 48VDC Power Supply AC100~120V/200~240V 50/60Hz Amplifier Output 2 x200W@8ohm, 400W@4ohm