Brief introduction:
Air temperature or skin temperature of servo-controlled by micro-computer with oxygen concentration monitoring system and humidity control system (optional); integrated sensor box including the skin temperature sensor, air temperature sensor, oxygen concentration sensor and humidity sensor; double wall hood an reduce the heating losing and the effect of outer heat resource; automatic curtain can reduce the heat losing ; inclination of infant bed can be adjusted; quite operation windows can reduce the disturbance to the baby during nursing; touch switch panel with LED digital display, set-temp, real-temp and auxiliary temperature are displayed separately; >37 temperature setting; multiply self-checking alarms with audible and visible; heating power rate indicates 0-100%; whole aluminum water tank, and it can be filled with water or discharge; RS 232 connector, data output.
Standard configure:
Hood, infant bed, temperature controller, integrated sensor box, water tank, air filter, Guardrail, I.V. Pole, cabinet.
Technical specification:
Power supply : AC220V,50HZ
Power input: 800VA
Air Temperature control range:25℃~37℃ can override to 39℃
Skin Temperature control range:34℃~37℃ can override to 38℃
Sensor precision: ≤0.3℃
Changing of temperature: ≤0.5℃
Uniformity of temperature: ≤0.8℃
Temperature rising time: ≤30min
Noise level: ≤55dB(A)
Inclination of bassinet: 0皛5?
Indication range of oxygen concentration:0%~99%
setting range of oxygen concentration:20%~60%
Indication precision of oxygen concentration:?%
Humidity indication range:0%RH~90%RH
Humidity control range:20%RH~90%RH
Humidity indication precision:?%RH
Alarming:
audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater (except for oxygen concentration alarm, humidity alarm, the low deviation alarm), meanwhile, the auxiliary temperature indication window can indicate the alarm code. For the following alarm, the relevant light is on, and for the alarm 1-4, press the alarm key to cancel the alarming sound for 5min.
Over-temp alarm: when the air temperature control ≤38℃(setting temperature is less th
| Post Date: | 5/20/2008 |
| Expiry Date: | 8/18/2008 |