Straight Centrifugal Grinder Features and Benefits
1. Consumption saving
The amount of energy consumption which the straight centrifugal grinder's blower consuming is only 6% of mill, but Raymond Pulverize is 81%. In addition, the consumed energy when the spiller slides the stone occupies 25% of the whole energy, but straight centrifugal grinder does not exist.
2. High efficiency
In same condition, the grinding roller of straight centrifugal grinder can be through an area 2.3 times larger than Raymond Pulverizer .
3. High using rate
Grinding roller and grinding ring of Raymond Pulverizer are sunken in middle parts, so the metal amount that discarded is only 35% of original weight, but materiel in straight centrifugal grinder fall from top to bottom, so the metal amount can reach high to 55%.
4. Accident insurance
If bolt or iron ore falls into the Raymond Pulverizer, this will conduce to breaking shovel and roller suspender transmutation. But straight centrifugal grinder will not appear such condition.
5. Well using against high hardness and hard-process material
As for some high-rigidity material, such as carborundum, corundum, zirconium, the output will fall down because the grinding roller and grinding ring of Raymond Pulverizer are sunken in middle parts. But in straight centrifugal grinder, it skives material up and down equably, so the output shows much more stabilization.
6. Wet production
Water is allowed using in Straight centrifugal grinder.
7. Occupation of area is small
The straight centrifugal grinder does not need to allocate whirlwind separator and a lot of pipelines .etc, so the occupation of land space is small.
Straight Centrifugal Grinder Technique parameter
Type: ZTM86
Max. Feed Size (mm): 16
Product Size (mm): 0-2.8
Capacity (t/h): 7-11
Power of Main Motor (Kw): 37
Dimension (mm): 2600x2100x2400
Type: ZTM 125
Max. Feed Size (mm): 25
Product Size (mm): 0.044-5
Capacity (t/h): 15-55
Power of Main Motor (Kw): 90-110
Dimension (mm): 2300x5600
Type: ZTM 165
Max. Feed Size (mm): 35
Product Size (mm): 0.044-5
Capacity (t/h): 30-120
Power of Main Motor (Kw): 185-200
Dimension (mm): Φ3600x8200
Note:
1.The average size of product is adjustable 2.The capacity is that feeding mate
| Post Date: | 5/19/2008 |
| Expiry Date: | 8/17/2008 |
| Other Price Terms: | negotiable |