Cylinder embroidery machine

1.The separated hooking part: it can control every head by separated. If the hooking part of one head was broken, it wouldn't influenced the others. Reducing the error of mechanical delivering, uniting the out and receive the hook.
2.The press foot drive part: the connection of the press foot drive and the pulley of press foot are adjustable, and it's easy to adjust the lowest part of the press foot. There is a suit of reduced shocker, which can reduce the noise when the press foot moved up and down. The needle bar drive and the press foot drive are separated, and the two drive are install in one transmission shaft, best control the press foot(it's convenient to adjust when the different material was been embroider.) Reducing the noise, decreasing the sustaining ability of the needle bar drive, and prolonging the use life of the machine.
3.The thread locking part: it can auto-locked the thread when every needle leave the work place, to prevent the thread dropped by other causes.
4.The turn around and change colour part: it supply a new-type changing colour part of embroider machine, it can install more colors in a small head interval.
5.The flat embroidery machine adopt apron type needle box, it is in the same line between needle bar and needle, take 9colors for instance, the least head interval has 275MM ,it is inefficient for