ST01 Silicone Extruder

Functions and Features:
1.It is composed of raw material pump,solidification pharmaceutical pump,proportional pump, sealant-mixture system,hydraulic pressure system,electric system and so on.
2.Raw material pump,solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the materials can be supported equivalently in two-way.The raw material pump is compelled by the hydraulic pressure sysem while the solidification pharmaceutical pump is compelled by the pheumatic motor.
3.There are high-pressure valves in the underpart entrance of solidification
pharmaceutitcal filter and material-feeding place of the mixing device and one-way valve is set in the mixing device so as to prevent two-components from fleeing each other.
4.Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole.Tighening the nut once the demanding scale is reached.
Technical Parameter:
Mixing ration proportion of mixture: 6:1-14:1
Raw material barrel:55Gallon(200L)
Solidification pharmaceutical barrel:5Gallon(20L)
Max.air-consumption volume:0.5m3/min
Max.squeeze pressure:20Mpa
Air source presure:0.5-0.8Mpa