AE/AF Series - High-Speed / Close-loop Hybrid Injection Molding Machine

AF Series High-Speed/Close Loop Hybrid Injection Molding Machine: AF-30, AF-50, AF-100, AF-200, AF-300, AF-400, AF-550
FCS announced complete new and intelligent model of HT series in the beginning of 2001 after struggling reaserching and development for so many years. To have further raising of technology level, FCS announce another new injection molding machines with close-loop by hybrid type of electricity and oil. By the technology of leader and complete new products guided the field of injection molding machines in Taiwan to approach new generation.
Clamping Unit
This model of precision injection molding machine is a new hybrid electricity and oil with high-speed injection and close loop system. To reach the purpose of injection under continuous high speed and precision, the clamping unit of this model of machine applied complete new and high rigid structure and MOOG close-loop high respondence servo valve. The tolerance of aliment of platen is less than 0. 05mm, the precision of clamping setting position is +-0. 1mm, the preciison of clamping force control is +-0. 5%. The lubrication of teggle system applied release pressure lubrication system by electrically filling grease which was made in Japan to get strong efficiency of lubrication and to save oil.
Injection Unit
Injectio unit applied AC servo-motor to feed materials, matching MOOG close-loop high respondence servo valve and accumulator, the screw rotation speed during feeding materials can be 356 rpm, the maximum injection speed can be 600mm/sec, the tolerance of injection and charge speed is less than +-0. 1% and the tolerance of injeciton position is +-0. 1mm. The precision of setting position is 0. 05mm, the precision of controlling time is 0. 01 sec, the tolerance of product weight is less than 0. 1%. The precision of back pressure and hold pressure control is +10. 5%. Generally speaking, the precision and stabilization are almost on same lever as all electric injection machiens to be suitable for producing super thin parts and products of micro-complicate precision.
Special Function
This model of machine also have the function of multi-stages injection-press, which can be suitable for the products of large area thin wall under low pressure of molding. Due