separate solar water heater-SHYIII-Y

Features:
The system could be mounted on the southern roof of the villadom, on the courtyard lawn, or the southern slope of the construction. The hot water could be delivered to any floor without limitation. The system has adopted the forced circulation (automatic control) work module to control the temperature automatically and deliver water by pressurization. So it has solved the long time inconveniences of manual operation. The system only needs small amount of investment, and it’s easy to handle. Moreover, it’s safe, convenient and energy saving, causing no pollution to the environment, so it’s complemented as “Green Project” by the experts.
2. The composition of the system:
The system is consisted of heat collector, storage water tank, working station and the piping. The solar collector is made of the our patent technology--- heat pipe and manifold, with high efficiency; The absorption coefficient is the vacuum superconducting tube  is more than 0.94, when the solar radiation is 800w/m² (sunny days in spring and autumn), the single vacuum tube could heat the water to 900^oC within 2.5 hours (little affected by the surrounding temperature). The storage water tank is made of the enamel inner tank, and the insulation layer is the polyurethane foaming to greatly improve the efficiency and the service life, so that it’s ensured that the solar heating system could work under minus 500^oC. The piping is the PPR pipe with good anti-corrosion and insulation to make the piping work for a long time.
3. Characteristics
　　▲The collector is made of the solar collector--- superconducting heat pipe solar collector to transfer the solar power to heat power.

Product specialty:
(1) High heat effectiveness: Higher than normal all-glass tube by 10%;
(2) Heat-pipe conduction, no water inside, thus it is successfully prevented form the defects of tube blockage and low power output caused by water fouling and deposits or dust and sand;
(3) With small thermal capability, it can output power in 2 minutes. The highest temperature of cooling end can reaches 250degree centigrade. The average heat efficiency can still be 50% even under -50 degree centigrade
(4) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube to get higher heat output in cloudy weather and in moist area, especially in winter.
(5) Solar collecting plate is installed and sealed inside the tube of high-quality borosilicate glass with 5x10-2Pa of vacuum, so it cannot be corroded even in moist area;
(6) Hot water system can endure 0. 6Pa so that it can be connected to tap water tube.